您要查找的是不是：
- Silver and copper tend to not dross out of the solder pot. 银和铜不易在焊料槽中生成残渣。
- There is no industry control limits for Copper and Lead in SnAgCu solder pot. 目前行业中没有用于SnAgCu焊料槽中铜和铅的控制极限。
- In this case the solder pot has to be changed or coated and the solder bar has to be replaced. 在这种情况下,必须更换或涂抹焊料槽,并更换焊料棒。
- Only partial removal of the contaminated solder pot will get the Pb concentration back below 0.1% wt. 只有将被污染的焊料槽部分取下才可以让铅浓度恢复到重量0.;1%25以下。
- Analysis of the solder pot is done by means of Atomic Absorption Spectrophotometric (AAS) or Inductive Couple Plasma (ICP). 对焊料槽的分析是通过原子吸收分光光度(AAS)或电感耦合等离子(ICP)方式实现的。
- If the Fe concentration increases in the solder pot this indicates that the solder pot is slowly dissolving because of the Pb-free alloy. 如果焊料槽中的铁浓度提高,则表明焊料槽因为无铅合金而缓慢溶解。
- If this happens the Fe concentration will increase rapidly and Fe-crystals can be seen on the surface of the solder pot. 如果发生这种情况,铁浓度将快速上升,并且会在焊料槽表面上看到铁结晶。
- Depending on the metallization on the board silver (Immersion Silver) or copper (Bare Copper or OSP over Copper) may actually leach into the solder pot. 根据线路板上的金属喷镀情况,银(浸银)或铜(裸铜或带有OSP层的铜)实际上可能会析出到焊料槽中。
- If i. E. SAC305 is used the volume compensation of the solder pot should be done with SAC300 (without copper) in order to maintain a constant Copper concentration. 如果使用了SAC305等,应使用SAC300(不含铜)进行焊料槽的体积补偿以保持恒定的铜浓度。
- Having optimized preheat temperatures, solder pot temperatures, and flux volume, the conveyor speed may have to be reduced to accommodate the solder wetting when using lead-free solder. 对预热温度、焊料槽温度和焊剂体积进行优化后,还可将传送带速度降低,以适应使用无铅焊料时的熔湿速度。
- Process modifications such as solder pot finishes for wave soldering equipment to avoid leaching issues are now available. 为避免出现浸析问题,诸如波焊设备焊锡槽终饰工艺的修改目前已经完成。
- For removing dross through converting dross back to solder from solder pot or wave soldering machine, and greatly lower down the solder oxidization. 可用于锡炉和波峰焊中锡渣的还原，大幅降低锡的损耗。
- Add this product into the molten solder pot for wave soldering,it can make the solder anti-oxidation and reduce the dross dramatically. 本品添加于自动波峰焊锡炉中，增强熔融焊锡的抗氧化性，大大减少锡渣的产生。
- Again, Kester's believes the triangular shaped lead-free bar will keep customers from making costly mistakes in their solder pots. 同样,凯斯特公司相信,三角形无铅焊锡棒将使客户得以避免因焊锡槽中用料错误而造成严重的损失。
- Lead-free soldering stations,intelligent rework stations,Soldering pot,Ionizing air guns,Smoke absorber,Glue dispensers,Soldering multi-testers,Industrial tools. 无铅焊台、无铅拆焊台、无铅熔炉、离子风机、吸烟仪、滴胶机、烙铁综合测试仪、工业工具等。
- The milk in the pot boiled up and spilled over. 锅里的牛奶煮沸溢了出来。
- The earthen pot is glazed inside. 瓦盆里面挂一层釉子。
- The boy put the ink pot back where it came from. 男孩把墨水瓶放回原来的地方。
- The firm is going to pot under the new management. 公司在新人管理下就要垮台了。
- Cut up the carrot before you put them into the pot. 把胡萝卜切碎後再放进锅内。
