您要查找的是不是：
- surface strengthen layer 表面强化层
- The strengthen layer of load-bearing surface of planet wheel axle by laser hardening was studied. 对行星轮轴的承载表面激光淬火后的强化层进行了分析和研究。
- Investigation on Microstructure and Property of Low-carbon Steel Surface Strengthened Layer 低碳钢表面合金强化层组织及性能的研究
- Using the double glow plasma hydrogen-free carburizing method carry through surface strengthen to enhance titanium alloy surface intension,Can avoid brittleness. 采用双层辉光离子无氢渗碳的方法对钛合金进行表面强化处理,提高了钛合金的表面强度,改善了其耐磨性；同时避免了氢脆的产生。
- Using the double glow plasma hydrogen-flee carburizing method carry through surface strengthen to enhance titanium alloy surface intension,Can avoid brittleness. 采用双层辉光离子无氢渗碳的方法对钛合金进行表面强化处理,提高了钛合金的表面强度,改善了其耐磨性;同时避免了氢脆的产生。
- A steel rule die is introdused which have strengthen layers and have e-poxy resin bonded to the die board to stiffen the die board against flexing during handling. 介绍一种钢带模,含有多层加强层,并用环氧树脂粘到模板上,以防止在运送装卸模具过程中使模板弯曲,同时为防止钢带松动及提高模具使用寿命。
- Repair of cold roller by surface strengthen 冷轧工作辊表面强化修复
- Metal arc spray mold is a kind of composite mold with functionally gradient material structure, and consists of metal shell, backing strengthening layer and steel frame. 金属喷涂模具由金属型壳、背衬强化层以及模框等构成，是一种具有梯度材料结构的复合材料模具。
- Furthermore, the employment of the inner die surface strengthening process with multi-metalization will greatly incre... 冷拔内模采用渗多元金属表面强化工艺，可以明显提高使用寿命。
- The forging crankshaft must normalizing and quenching - tempering in order to gain mi-crostructure ready for surface strengthening. 模锻钢质曲轴须经正火、调质处理,为表面强化作好组织准备。
- A surface, layer, or mass of frozen water. 冰面冻结的水的面、层或块
- For remanufacturing of shaft components, a used shaft is used as a work-piece and repaired and modified with advanced surface strengthening technology to realize regeneration. 轴类零件的再制造是以废旧的轴为毛坯，采用先进的表面强化技术等修复或改造废旧的轴，使之获得再生。
- The microstructures of shot peening strengthening layer on Titaniun were studied by optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). 利用光学显微分析(OM)、扫描电子显微分析(SEM)及透射电子显微分析(TEM)对喷丸强化工业纯钛表层组织特征进行了研究。
- And microscopic analysis indicates that some microsize mineral particles embedded friction surface, which make friction surface strengthened and recoverable. 同时，微观分析表明，微小的摩圣矿物粒子大量嵌入摩擦表面，可对摩擦表面起到强化和修复的作用。
- GC brand bimetal hacksaw prroducts, bimetal reciprocating saw blades, jig saw blades are made with vacuum heat treatment and surface strengthening treatment technology. 上海“奇熙(GC)”牌双金属手用锯条、曲线锯条、往复锯条采用真空热处理和表面强化处理方法，工艺独特，品质卓越，已被国内外用户认可。
- After being steamed and press dried to certain middle moisture content,the Fast-growing Pinus massoniana lumber were surface strengthened with different kind of resins. 对马尾松速生材汽蒸预处理后,热压干燥至一定的中间含水率,再用不同的树脂进行表面强化改性处理。
- The theory and characteristics of the process of electrospark surface strengthening are introduced. The researching status and the development trend in this field are described. 介绍了电火花表面强化的原理与特点,概述了电火花表面强化技术的研究现状,指出了电火花表面强化技术的发展趋势。
- The result showed that the microhardness,finish and time of strengthening layers related to parameter of strengthening technology. 试验结果表明,表面强化层硬度、表面光洁度和强化时间与选择工艺参数有关;
- The gas bubbled to the surface of the water. 气体变成气泡升上水面。
- The same technology parmeter, strengthening layers of high carbon parent metals with high microhardness and good were - resistance can b... 相同工艺参数,含碳量高的基材,得到强化层硬度较高,表现出耐磨性较好。
