您要查找的是不是:
- Assembly constraint modeling based on mating surface couple 基于配合面偶的装配约束建模
- mating surface couple 配合面偶
- Disc is guided by the mating surface of the seat. 可通过所匹配的阀座表面导引阀瓣。
- Remove any paint and burrs from the mating surface at the splits and thoroughly clean the housings. 清除剖分部位配合表面上的任何油漆和毛刺,并彻底清洁轴承座。
- The inferential reasoning based on the mathematical model of straight bevel gear mating surface in project application. 推导基于工程应用的直齿圆锥齿轮啮合面的数学模型。
- Clean the exhaust manifold and cylinder head mating surfaces. 清洁排气歧管和汽缸头配合面。
- Disc is guided by the mating surface of the seat, hardfaced with 13 CR, Stellite 6, SS 316 or Monel, ground and lapped with seat. 阀瓣通过啮合阀座表面进行导引,阀座表面经过13CR、钨铬钴合金、316不锈钢或蒙乃尔硬化、研磨抛光。
- It proves that additive can greatly improve the tribological performances of friction pairs by observing the variance of mating surface topograph, wear mass loss, friction factor and so on. 通过分析对摩表面的形貌特征、磨损量和摩擦因数等方面的变化,结果表明,抗磨添加剂能极大地改善机械系统的摩擦学性能。
- This oil film separates the mating surfaces and appreciably reduces the friction between them. 这层油膜将配合面分离开来,明显降低了配合面之间的摩擦。
- Two-piece gland with spherical mating surfaces to assure an even packing load over 360%. 配置球形表面的两件式压盖保证填料符合超过360%25,且均匀稳定。
- This helps eliminate any clearance between the mating surfaces of the spindle and tooling shank. 程序的格式和语言是根据机床硬件设备和微控制器来决定的。
- The cause of rolling resistance is the deformation of mating surfaces of the rolling element and the raceway on which it rolls. 辗压抵抗的原因是滚动元件和滚道在其轧辊上的齿合表面的变形。
- For absolutely leak-tight joints, the peaks must be deformed with torque until a large portion of mating surfaces is in microscopic contact. 为了完全气密连接,在接触表面的大部分处于精微接触之前,顶点在压力下肯定会有所变形。
- The force to drive the bearing up on the sleeve is some 40 % lower than for other types of sleeve mounting as friction only occurs between two mating surfaces. 在套筒上推动轴承的力比其它类型的套筒安装小40%25左右,因为摩擦只出现在两个配合表面之间。
- Broaching of Connecting Rod Mating Surface Groove 连杆结合面凹凸槽的拉削加工
- In each of these latter cases I initially positioned the mating surfaces and secured them with cyano, then adjusted as needed, and finally secured them with another drop of glue. 在所有这些后一种情况下我最初的位置交配表面和担保他们氰基,然后根据需要调整,并最终担保他们与另一滴胶水。
- The gas bubbled to the surface of the water. 气体变成气泡升上水面。
- The surface of the liquid gradually crusted over. 液体表面渐渐地结了一层皮。
- The experimental results showed that load, sliding speed and roughness of mating surfaces all played notable impacts on the friction and waer behaviors of PTFE and PTFE/LCP composites. 实验结果表明:负荷、线速度以及偶件的粗糙度等因素对PTFE及其合金的摩擦磨损行为有较大影响;
- A breeze ruffled the surface of the lake. 一阵微风吹皱了湖面。