您要查找的是不是：
- liquid aluminum lift pot 铝水抬包
- Effects of various process variables on average flow velocity of LFC liquid aluminum in the mold have been studied. 研究了各工艺因素对消失模铸造铝液在型腔中平均流速的影响。
- A two-dimensional mathematical model was provided for solidifying of liquid Aluminum with its approximate solution in liquid-solid clad rolling. 摘要本文给出了钢／铝液固相复合轧制中铝液凝固过程的二维数学模型及其近似解；
- Aimed the manufacturing of aluminumbased composite materials from liquid aluminum,the mechanism of interface wettability improvement is analyzed. 针对开展的液态铝合金制备铝基复合材料的工艺过程,分析界面润湿性改善的机理。
- The manufacture processes of liquid aluminum electrolytic capacitor were introduced, and the failure modes of it were also summarized. 简述了液态铝电解电容器的结构与制造工艺流程,归总了其失效模式。
- The hollow sprue and suitable vacuum pressure is helpful to decreasing the pinhole,but,when the vacuity is too high,the liquid aluminum would become turbul... 充型过程中施加一定的真空度有利于减少针孔,但真空度太高则会促使铝液产生紊流,反而增加铸铝件的针孔,降低其密度。
- The dependence of the temperature of the clad, solidifying forefront on temperature of liquid Aluminum, temperature of steel plate and velocity of roll was predicted. 给出了铝液初始温度、钢板预热温度和轧制速度等参数与复合板温度、凝固前沿的关系；
- The hollow sprue and suitable vacuum pressure is helpful to decreasing the pinhole,but,when the vacuity is too high,the liquid aluminum would become turbulence causing pinholes increased. 充型过程中施加一定的真空度有利于减少针孔，但真空度太高则会促使铝液产生紊流，反而增加铸铝件的针孔，降低其密度。
- Center-spreading gating system was adopted, and ingate was designed at thick location of the parts, which is helpful to transferring pressure and to filling and feeding of liquid aluminum alloy. 采用“中心展开浇道系统”,内浇道设置在压铸件较厚处,以利于压力传递、金属液的充填和补缩。溢流排气系统都设置在金属液直接冲击的地方或者死角区,以防止产生涡流,稳定流态,有利于废气和冷污金属液排出。
- LARS (Liquid Aluminum Refining System) LARS
- level fluctuation of liquid aluminum 铝液液面波动
- Most synthetic detergents are in the form of powder or liquid. 大多数合成洗涤剂呈粉状或液态。
- Be careful not to lose too much liquid by evaporation. 小心，不要因为蒸发作用而失掉过多的水份。
- Investigation on Liquid Aluminum Filling Velocity of LFC Process 消失模铸造铝液充型速度研究
- lift pot 提升斗
- The surface of the liquid gradually crusted over. 液体表面渐渐地结了一层皮。
- scaleboard of lift pot 提升斗板
- Automatic forklift truck weighing system for liquid aluminum 铝水叉车自动称重系统
- The dregs settled and the liquid became clear. 渣滓沉淀下来，液体变清了。
- Keywords Liquid Aluminum Alloy;Spinning Rotor;Degassing;Simulation; 铝合金熔体;旋转喷吹;除气;模拟;
