您要查找的是不是:
- AAO template Method 模板法
- Abstract: In this work, potential-modulation method was used in two-step anodization process to make an AAO template with Y-type nanochannels. 摘 要: 利用两步氧化法,通过对氧化直流电压进行周期性调制可制备出带有Y型孔道的氧化铝模板;
- Lots of metal nanoarrays have been made in AAO template. 目前,应用此模板已合成出多种金属纳米阵列。
- The key factors affecting the ordered array of AAO template were studied. 研究了影响多孔氧化铝模板孔有序性(分布均匀,大小一致)的关键性因素。
- The dimensions of nano material can be well controlled through template method, which was verified by the PPy deposited in AAO has the same diameter with AAO’s pore according to SEM results. 采用电化学方法在AAO模板中沉积了PPy,通过循环伏安法研究了其电化学性能,表明PPy具有优良的电化学可逆性和循环性能,适合用作电池的电极材料,SEM结果显示了溶掉AAO模板后的PPy的直径与所用模板的纳米孔径相当,说明了模板法在控制纳米尺寸上的有效性。
- Add and override behaviour using template methods. 用模板方法加入和重写行为。
- AAO template synthesis technology is one of the most important methods for the preparation of nanostructure and it is hot spot in nanomaterial research. 摘要阳极氧化铝模板合成技术是近年发展起来的纳米结构材料组装的最重要的技术之一,是目前纳米材料研究中的一个热点。
- Some of the patterns covered are Singleton, Observer, Template Method, Iterator, and Proxy. 这些模式涵盖了单件模式,观察者模式,模板方法模式,迭代器模式和代理模式。
- Template method was used in IVCD system to quickly and easily build vehicle body concept geometry model and FEM model. IVCD基于车身模板技术,可快速生成车身概念结构几何模型和有限元模型;
- A Fast Interference-Resistent Deformable Template Method for Detecting the Circle[J]. 引用该论文 于新瑞;王石刚;关柏青;王颖峰.
- Metal nano-hole array copied from AAO template 金属铜纳米孔洞阵列膜制备方法研究
- Metal aluminum films were deposited on AAO templates by radio-frequency magnetron sputtering. 用射频磁控溅射法在阳极氧化铝模板表面制备了金属铝膜。
- Mb/AAO/Au colloid /GC electrodes were made by immobilizing Mb on the surface of Au colloid modified glassy carbon electrode covered with AAO templates. 将肌红蛋白(Mb)固定在纳米氧化铝(AAO)模板-金胶复合组装体修饰玻碳电极表面;制得Mb/AAO/Au colloid/GC薄膜电极.
- The activation of crosslinked resin prepared by using template method, glutaraldehyde as crosslinked agent, and epichlorohydrine as active agent under microwave irradiation was investigated, and the effects of some factors on EPV were also investigated. 研究了微波辐射下用模板法经戊二醛交联的壳聚糖树脂作载体 ,环氧氯丙烷作活化剂 ,交联壳聚糖活化的最适活化条件。
- The preparation process of titania nanoarrays in sol-gel template method was studied. It was found that the sol could enter the pores more easily in a certain negative pressure condition. 研究了Sol-Gel模板法制备氧化钛纳米阵列的过程,发现在一定的负压条件下,可以使溶胶顺利进入模板的孔中,解决了采用高浓度溶胶、小孔径模板难以通过Sol-Gel模板法合成纳米阵列的难题,并成功地合成了高质量、小直径的氧化钛纳米线和纳米管阵列。
- We integrate template method with translating method of UML to ACME,and this integrated method acts as abstract method in middle stage, method of UML to XML acts as final translating result. 把UML到ACME的转换结合模板方法,放在中间阶段作为抽象方法来描述,UML到XML的转换作为最终的转换结果,进行优化组合,达到相得益彰的目的。
- The structure of tiny hole hydroxyl apatite,prepared by template method,is described with X ray diffraction(XRD),scan electronic microscope(SEM) and transmission electronic microscope(TEM). 采用模板法制备了微孔羟基磷灰石,采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)对其结构进行了表征。
- The mesoporous carbons via the template method,tetraethoxy silane(TEOS)acted as the source of the template silica and phenol - formaldehyde resins as the carbon precursor,was prepared. 以正硅酸乙酯为模板硅源,酚醛树脂为炭前驱体,运用模板法制备了中孔炭材料。
- Ni nanowires are deposited in AAO templates by AC electrodeposit method.The effects of depositing time and voltage on Ni nanowires have been analyzed by Transmission Electron Microscopy (TEM). 采用交流电化学沉积法在氧化铝模板中成功填充了镍纳米线阵列,探讨了沉积时间、沉积电压等工艺参数对镍纳米线的影响;
- The synthetic methods such as CVD,solvothermal and template method for preparation of spherical structured carbon materials are introduced. 综述了近年来国内外球形碳材料的合成方法,如化学气相沉积、溶剂热法和模板法等;