您要查找的是不是：
- A novel structure TFPPM motor is presented, and the inductances are calculated by 3D finite element method (FEM). 提出了一种新型结构的横向磁场永磁同步电动机；
- Objective: To explore an easier and more precise method to reconstruct 3D finite element model of post crown with Matlab and Pro/E. 目的:利用Matlab和Pro/E软件辅助建立桩核冠三维有限元模型。
- Aimed at the structural features of sley sword, sley and reed, a 3D finite element analytic model was established for the sley sword, sley and reed. 摘要根据无梭织机筘座脚、筘座、钢筘的结构特点，建立了筘座组合体三维有限元分析模型。
- Both of accuracy and speed should be considered when a 3D finite element method is used to simulate dual laterolog response. 用有限元法模拟三维地质环境中的仪器响应常会遇到计算精度和计算速度的矛盾。
- The SIF along the crack front are directly computed by 3D finite element method for a wide range of variations of the crack geometry. 考虑了裂纹的几何形状、深度等影响因素，对圆筒内外两侧同时存在裂纹的情况进行了研究。
- The deformation of ground surface during the construction of curved pipe-jacking is studied with 3D finite element methods. 摘要通过建立三维有限元模型，研究了曲线顶管施工过程中地表的变形规律。
- A 3D finite element model, of the substructure of the cut-and-cover tunnel for analyzing their coaction, is established. 浃底隧道出口明洞段回填厚度较大而基础土体软弱,因此采用了桩-筏基础的形式以避免过大沉降带来的不利影响。
- A concrete material model for penetration computation was presented, and the ogive-noded rod projectile penetrating concrete target was simulated by a 3D finite element program. 摘要介绍了一种适用于侵彻计算的混凝土材料模型。通过所建的有限元程序对杆弹侵彻混凝土靶进行了数值模拟。正侵彻的计算结果和实验结果具有较好的一致凌。
- Equivalent magnetic circuit model and 3D finite element method developed in this paper are helpful to the more study on optimizing design and full-load characteristic of IPM-HESM. 所建立空载磁路模型及三维有限元分析方法为该新型电机的优化设计、性能分析以及负载特性进一步研究奠定了基础。
- A 3D finite element analytic model was established for the rapier driving system to investigate the structural features of its griper heads, belts and wheels. 摘要针对剑杆织机剑带、剑头、传剑轮的结构特点，建立了传剑系统三维有限元分析模型。
- Aimed at the structural features of sley sword, sley, reed and rocking shaft, a 3D finite element model was established for the sley sword, sley and reed and rocking shaf. 针对无梭织机筘座脚、筘座、钢筘、摇轴的结构特点,建立了筘座系统三维有限元模型。
- This paper carries on the 3D finite element structure analysis for power house monolith with a bulb turbine hydropower station located in the upstream of Huang River as the carrier. 摘要以黄河上游拟建的某灯泡贯流式水电站为载体，对厂房坝段整体进行了三维有限元结构分析。
- Methods Based on computed tomography (CT) scan data of a woman, a 3D finite element model of the first molar on the left was rebuilt by computer imagines process and computer aided design (CAD). 方法采用下颌骨计算机断层扫描(CT)数据、通过计算机图像处理及计算机辅助设计(CAD)技术,获取精确的下颌骨第一磨牙几何模型。
- Gergis, G.W., “3D Finite Element Analysis of Temperature-Induced Strresses in Dowel Jointed Concrete Pavements,” The International Journal of Geomechanics Vol. 1, Number 3,291-307, 1978. 郑翔仁，“中正机场刚性铺面监测资料分析”，国立台湾大学土木工程学研究所硕士论文，民国九十三年六月。
- Aimed at the structural features of swinging movable teethed reducers, a 3D finite element model was established for the reducer assemblage with swinging movable teeth was established. 摘要针对摆动活齿减速器的结构特点，建立了摆动活齿减速器装配体的三维有限元模型。
- Three rolling schedules were selected, dynamic simulations on the preloaded housing of cold ring rolling mill were proceeded with 3D finite element method, the results were compared. 选取3种轧制规程，用三维有限单元法对预紧机架进行了动力仿真，并进行了分析和比较。
- 3D finite element numerical simulation 三维有限元数值模拟
- 3D Finite Element Method Static Analysis 三维静力分析
- 3D finite element analysis (3D FEA) 下颌骨
- 3D finite element method (FEM) mesh 三维有限元网格
