您要查找的是不是：
- wet gate oxidation process 湿栅氧化工艺
- Catalytic wet peroxide oxidation process has been developed particularly to treat high concentration or low-degradable organic wastewater in recent years. 摘要催化湿式过氧化氢氧化技术，是一种专门针对高浓度难降解有机废水的处理技术。
- The wet oxidation technique and its effluence factors are introduced.It is pointed out that the reaction temperature and the properties of organics are the key factors to wet oxidation process. 对湿式氧化技术及其影响因素进行了介绍,叙述了各种因素的影响作用并对各因素的影响强弱进行了比较,认为反应温度和处理对象的性质是影响湿式氧化技术处理效果的关键因素。
- With Keithley S900 and TEL-P8 test system, it is applied in the evaluation of gate oxide lifetime of 0.13um process. 本文就已有的测试项目TDDB，根据国外前沿的研究结果，提出了一些新的测试方案，并在C语言的环境下实现算法，结合Keithley S900和TEL-P8测试系统，用于测试0.;13um工艺的栅氧化层寿命。
- catalytic wet air oxidation process 湿式催化氧化技术
- Chapter 1 is an introduction of DPN nitrided gate oxide experiment. The process flow design, device structure and measurement tool are also introduced to realize this experiment. 第一章将针对使用去耦电浆氮化闸极氧化层之背景以及实验规划做个简介，包含元件的制程内容、元件结构及量测仪器，以注明本实验之过程。
- The effect of reflux temperature, reflux ratio and reaction pressure on the oxidation process was simulated. 用此模型考察了反应压力、冷凝回流温度和回流比对反应过程的影响。
- Study was made on the use of bio-contact oxidation process for treatment of municipalwastewater containingseawater. 采用生物接触氧化法对含海水城市污水进行了试验研究。
- An early hypothesis by Chakraborti holds that the arsenic is associated with iron pyrites and enters the aquifers by an oxidation process. 加卡波狄较早提出的一个假说认为，砷与黄铁矿结合并透过氧化作用进入含水层。
- The optimal DO in activated sludge process and contact oxidation process are respectively 4 mg/L and 6mg/L. 在活性污泥段溶解氧宜维持在4mg/L,在接触氧化段溶解氧宜维持在6mg/L。
- This voltage creates a field across the gate oxide, which causes the adjacent P substrate to invert to N-type. 这一电压在栅极氧化物层上产生一个电场，它导致毗邻的P型衬底转变成N型。
- There is extraordinary superiority for supercritical water oxidation process in treating wastewater. 摘要超临界水氧化法在处理废水方面具有独特的优势。
- At the sub 90nm technology node, the gate oxide thickness is expected to be 12-15 Angstrom. 当半导体结点技术发展到小于90纳米时,栅氧化层厚度将减薄至12到15埃。
- The anodic oxidation process of aluminum in sulfuric acid was investigated using constant voltage electrolysis method. 采用恒电压电解法研究了铝在硫酸中的阳极氧化过程。
- In this thesis, we are going to discuss the characteristics of DPN nitrided gate oxide. 因此本论文将讨论去耦电浆氮化闸极氧化层之元件特性。
- The fur collar mats when it gets wet. 皮领子湿了时毛就结在一起。
- The airlift contact oxidation process is the combination of airlift technology with contact oxidation method. 将气提技术与接触氧化法相结合而形成气提式接触氧化工艺。
- The application of floatation-hydrolysis-contact oxidation process to treat batik wastewater was presented. 介绍采用气浮-水解-接触氧化工艺处理蜡防印花废水技术。
- To obtain high performance and low power device, gate oxide thickness shrinkage is a main stream in modern ULSI industry. 摘要:为了达到高性能和低电压之元件，减少闸极氧化层厚度是现代超大型积体电路工业的一个主流。
- Abstract： The surfaces of poly-Si thin film and gate oxide of thin film transistors were passivated using N2O/NH3 plasma. 摘 要： 采用N2O和NH3等离子钝化技术对多晶硅薄膜表面和栅氧表面进行了钝化处理。
