您要查找的是不是：
- Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition. 采用焊条电弧焊工艺方法,选用CHR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
- The Welding Material and Welding Process Testing for Sea-water Condenser 海水主冷凝器焊接材料及焊接工艺试验研究
- welding process test 焊接工艺试验
- Debug process equipment, organize process test. 调试工艺装备，组织工艺试验。
- Design and management expert system of welding process for pressure. 化工。压力容器焊接工艺制定与管理专家系统。
- It has great interest to establish Expert System (ES) for spot welding process. 建立点焊专家系统，对于实现点焊过程的智能化，优化点焊规范参数，降低对操作者的要求，提高点焊质量，具有重要意义。
- The jointer area ,welding position and welding process influence it mainly. 接头区 域、焊接位置和焊接工艺对其都产生较大的影响。
- Conduct in process tests per the control plan. 管理每个控制计划的过程测试。
- Welding process certification test is an important test complied with EN standard to validate the welding process, ensure the welding quality and meet the requirements of manufacture in large scale. 焊接工艺认证试验是在焊接生产中根据欧洲标准,验证焊接工艺、保证焊接质量,从而满足大规模生产需要的重要试验。
- Process testing of aerators in oxidation ditches. 昆明第一污水厂氧化沟工艺运行实践及。
- The new welding process has made possible the wide application of stainless steel in petroleum industry. 新的焊接工艺使不锈钢有可能广泛应用在石油工业中。
- Implement welding process and procedure to ensure quality and timely welding work. 执行焊接工艺和程式,保证达到质量和时间要求。
- The process test result indicates that the drillpipes fabricated with TLP diffusion welder has small deformation on drillpipe joint ... 工艺试验结果表明,采用钻杆中频瞬时液相扩散焊机制造的钻杆焊接接头变形小、成形美观、接头强度和韧性达到母材水平。
- Improvement on welding process of continuous caster chain bracket for Tonghua Steel Co. 通钢连铸机链条托架焊接工艺的改进。
- In terms of the feature of the self-piercing riveting process test,the evaluation index system for the riveting process program is constructed. 针对自冲铆接工艺试验的特点,构建了铆接工艺方案的评价指标体系。
- Start the welding process and visually control it by observing the melt penetrating out of the two indicators. 开始真正操作进行熔接加工时,要留心深入的观察两个指示器。
- This article describes the welding process and precautions for the most widely used alloy series ESCO 12 and ESCO14. 文章介绍使用最广泛的ESCO12、14系列合金的焊接工艺及注意事项。
- Bead welding process to Q235A was made by TIG welding and H1Cr24Ni13 austenitic stainless steel welding wire. 采用TIG焊方法和H1Cr24Ni13奥氏体不锈钢焊丝,对Q235A进行堆焊加工。
- Through the process test、wearing test and microstructure observation and analysis,the convention performance of oxygen-acetylene flame spray welded layer is studied. 通过工艺试验、耐磨试验和显微组织观察分析,研究了氧-乙炔火焰喷焊层的常规性能。
- The "zone of interests" issue has proved to be the less controversial of the two prongs of the Data Processing test. 对"数据加工"案的双重标准，"利益范围"问题被证明是争议不多的。
