您要查找的是不是:
- The paper researches the relation of parameters and weld width of TIG deposit surfacing used in rapid prototyping. 研究了用于快速成形的TIG熔敷堆焊工艺中各参数与焊缝宽度的关系。
- This is beacause that the the addation of arc voltage means the decreasement, so the enlargement of are swing makes the increasement of weld width. 这是因为电弧电压增加意味着电弧的长度增加,因此电弧摆动范围扩大而导致焊缝宽度增加。
- It is analyzed that the effects of the crack depth, strength mis matching, weld width and the crack location on the plastic zones evolution at crack tip. 分析了不同的裂纹深度、强度组配、焊缝宽度以及不同位置裂纹的焊接接头试样对塑性区形状发展的影响规律。
- Arc voltage: :When the other conditions don't change, the arc voltage is added, the weld width will increase notably,but theweld depth and weld reinforcement will decrease smally. 电弧电压:当其它条件不变时,电弧电压增大,焊缝宽度显著增加而焊缝和余高将略有减少。
- Weld-shape( butt weld width, size of fillet weld) is an indicator of weld features and it also is an important factor of quality welding. 焊缝尺寸(对接焊缝的焊缝宽度、角焊缝的焊角尺寸等)表示焊缝形状特征的指标,是影响焊缝质量的重要因素之一。
- The results showed that with the increase of laser powers,the weld width of both laser side and arc side became broadened,and the degree of an increase of the widths of bo... 增加激光功率或提高焊接电流都会引起焊缝最小熔宽的增大,且焊缝最小熔宽的深度也发生一定的变化。随焊接速度的提高,激光侧的深宽比增加,而电弧侧的深宽比减小。
- Based on a lot of experiments and the data of weld width of TIG deposit surfacing,influencing parameters of weld width and the criterial welding measure during TIG deposit surfacing are advanced. 在大量试验的基础上,对TIG熔敷堆焊焊缝宽度进行数据分析,得出了在TIG熔敷堆焊情况下焊缝宽度的影响参数,提出了关于TIG熔敷堆焊焊接的规范措施。
- The garden is six meters in width. 花园的宽度为六米。
- Is the material single width or double width? 这幅料子是单幅的还是双幅的?
- Some metals weld better than others. 有些金属容易焊,有的不容易焊。
- The width of the room is 20 feet. 这房间宽二十英尺。
- Neuro-fuzzy Control of Back Weld Width in TIG Welding TIG焊背面熔宽的神经网络模糊控制
- Real-time monitor system of weld width in micro-plasma arc welding 微束等离子弧焊接焊缝熔宽的实时检测控制系统
- Keywords different material;weld width;critical crack tip opening angle(CTOA);propagation energy increment; 异种材料;接头宽度;临界CTOA;扩展能增量;
- It takes speed and skill to weld steel at this heat. 在这样的温度焊钢需要速度和技术。
- Each fold in the skirt should be exactly the same width. 裙子上的每条褶都应该一样宽。
- It take speed and skill to weld steel at this heat. 在这样的温度焊钢需要速度和技术。
- Having only two dimensions, especially length and width. 二维的只有二维的,尤指长度和宽度
- It takes speed to weld steel at this heat. 在这样的高温下熔接钢铁需要快速。
- They weld the pieces of a broken axle. 他们焊接断了的车轴。