您要查找的是不是：
- The wear mechanism of the converter dedust fan is briefly analyzed. 简要分析了除尘风机的磨损机理。
- The adhesive wear was the dominative wear mechanism. 磨损机制以粘着磨损为主。
- Tribological properties and wear mechanism of the CCF/MCPA are investigated. 主要研究了CCF/MCPA复合材料的摩擦学性能和磨损机制。
- The main wear mechanism of rare earth/MoSi 2 composite is adhesive wear. 稀土 /MoSi2 材料的磨损机制主要是粘着磨损
- The wearing mechanism of compound material is a synthetical combined function of micro-cutting wearing and surface peeling off and grain wearing. 复合材料的磨损机理是微切削磨损、表层剥落和磨粒磨损的综合作用。
- According to the analysis of wearing curve by tests and wear topography by SEM, slurry erosion wear mechanism of modified epoxy adhesive coating was discussed. 浆体冲蚀磨损机制的分析讨论是结合磨损试验获得各种情况下的磨损曲线与扫描电镜观察到的磨损形貌进行分析的。
- The main wear mechanism of high speed roller chain is formation and propagation of crack in top layer of pin and bush. 汽车用高速滚子链的主要磨损机制是销轴、套筒零件表层的裂纹生成、扩展与剥落。
- The main wear mechanisms are adhesion, diffusion and fatigue. 磨损机理主要是粘结磨损、扩散磨损以及疲劳磨损。
- The research progress of water lubricated bearings was introduced,including material,lubricate and wear mechanism. 介绍了水润滑轴承材料、润滑机理及磨损机理的研究现状。
- Wear mechanism of direct-bonded and silicate bonded MgO-Cr2O3 bricks for copper-making converter has beenstudied. 研究了炼铜转炉用直接结合镁铬、硅酸盐结合镁铬砖的损毁机理。
- The research progress of water lubricated bearings was introduced, including material , wear mechanism and application. 介绍了水润滑轴承材料、润滑机理及磨损机理的研究现状。
- The wear mechanism of Mg-PSZ ceramic is micro-ploughing accompanied by microcracking at room temperature. 随着温度的进一步升高磨损率增大；
- The network interpenetrating of ternary alloying system of PSR(polysulfide rubber)/E_(51)(epoxy resin)/BC(brown corundum)and its high accuracy wearing mechanism against metal were studied. 研究了PSR(聚硫橡胶)/E_(51)(环氧树酯)/BC(棕刚玉)三元共混体系的网络互穿和环氧树脂与棕刚玉的加入量对45钢磨光表面粗糙度的影响。
- Under the condition of boundary lubrication,adhere wear mechanism and abrasive grain wear mechanism do the business at the same time. 在边界润滑条件下;镀层的磨损机制为粘着磨损与磨粒磨损并存.
- According to nephogram of stress, the wear mechanism of the conical twin-screw for the processing of wood/plastics composite is also analyzed. 根据螺杆的应力状态，对用于加工木塑复合材料的锥形双螺杆磨损机理进行了分析。
- The wear mechanism of stainless steel against copper based sintered alloy is mainly attributed to adhesion,abrasion and oxidation. 不锈钢/铜基烧结合金材料的磨损机制主要是粘着磨损及氧化磨损。
- According to nephogram of stress,the wear mechanism of the conical twin-screw for the processing of wood/plastics composite is also analyzed. 根据螺杆的应力状态,对用于加工木塑复合材料的锥形双螺杆磨损机理进行了分析。
- SEM observation suggested that the wear mechanism of FEP coatings appeared to be obvious fatigue wear at relatively high temperatures. 在较高的环境温度下，涂层的磨损呈现出明显的疲劳磨损特征。
- The main wearing mechanisms of the tin bronze are fatigue splitting, adhesive transference and abrasive wearing. 锡青铜的主要磨损机制是疲劳脱层、粘着转移和磨料磨损。
- The frictin and wear mechanism of material was transformative from abrasive wear to adhesive wear as the pressure increasing. 随着压力的增大,材料在真空中的磨损机理由以磨粒磨损为主逐渐转变为以黏着磨损为主。
