您要查找的是不是：
- Visually inspect all sealing element. 目视检查所有密封件。
- Visually inspect sample and record any cosmetic defects. 目测样品是否有表面缺陷,如果有就记录下来
- Visually inspect that the vent is fully open to pass test. 为了通过检测,目测检查排气口全开。
- Visually inspect vent to ensure that vent goes to full open position when the pressure is at zero. 目测检查排气口以确保当压力为零时,排气处于全开位置。
- Visually inspect stored cylinders on a routine basis, or at least weekly, for any indication of leakage or problems. 定期或至少每周用眼睛检查储存的钢瓶是否有任何泄露迹象或问题。
- Visually inspect cargo compartment and door jambs, make sure that no liquid flows out or corrosion due to chemical produce, sea food and poultry etc. 目视检查货舱及厂门框,没有因化学制品,海鲜,家禽等货物而造成液体溢出或腐蚀现象。
- The Contractor shall then visually inspect them, and shall promptly give notice to the Engineer of any shortage, defect or default in these materials. 然后，承包商应对材料进行目测检查，并应将这些材料的任何短缺、缺陷或损坏通知工程师。
- Visual inspections will be unaided (naked eye). 视觉检测单独进行(肉眼)
- Execute daily QA visual inspection. 执行日常的QA目检。
- Almost all problems can be found by visual inspection. 几乎所有的故障都可以目查诊断。
- Does the company carry out a 100% function and visual inspection? 公司有执行100%25功能及外观检验吗?
- Practice for Visual Inspection of Asbestos Abatement Projects (04. 石棉减少项目的目视检测的实施规程(04。
- Employees will visually inspect receptacles, extension cords, and equipment connected by cord and plug before each day's use in order to determine whether there are external defects. 对电气设备，电线和连接插座每天使用之前进行检查，确定是否有外观缺陷。
- All equipment and tools must be visually inspected for damage and / or wear. 所有的设备和工具必须目测检查损坏、磨损情况。
- Training the Visual Inspection people in both W. F. Dept. and Test Dept. 培训制造部及测试部的目检操作人员。
- Excellent skills for visual inspection, defects analysis and problem judgment. 优秀的目检及分析、判断水平。
- Code for visual inspection and acceptance of site weld of engineering. 工程建设施工现场焊接目视检验规范。
- Training the Visual Inspection people in both W.F. Dept. And Test Dept. 培训制造部及测试部的目检操作人员。
- Each rotor core is visually inspected for complete filling of the die-cast end rings and fan blades. Correct core length is verified by measurement. 每个转子芯都经过人工检查是否完整配置压铸轴承挡圈和风机叶片。转子芯的长度经过测量复核以确定其长度正确。
- Each rotor core is visually inspected for complete filling of the die-cast end rings and fan blades. 每个转子芯都经过人工检查是否完整配置压铸轴承挡圈和风机叶片。
