您要查找的是不是：
- Arc slag remelting (ASR) of the ESR absorption and the advantages of vacuum arc remelting. 弧渣重熔（ASR）吸收了电渣重熔和真空电弧重熔的优点。
- vacuum arc remelting (VAR);electroslag refining (ESR); 真空电弧回炉(VAR)；
- Experimental Study of Melt Rate Control Model on Vacuum Arc Remelting Furnace 真空自耗电弧炉熔速控制模型的实验研究
- vacuum arc remelting 真空电弧重熔
- vacuum arc remelting process 真空电弧重熔法
- vacuum arc remelting furnace 真空自耗电弧炉
- vacuum arc remelting(VAR) 凝壳炉
- Argon arc remelting hardening is a new technology of manufacturing cramshaft. 氩弧重熔硬化是生产凸轮轴新工艺。
- Vacuum arc double electrode remelting process 双电极式电弧真空重熔法
- The microstructure,wear resisting and abrasive mechanism of argon arc remelting area of alloyed casting iron camshaft is studied. 研究了合金铸铁凸轮轴氩弧重熔淬火后强化层的组织、耐磨性及磨损机理。
- The effect of second anode action on the cathode vacuum arc discharge stability in the cathode arc deposition technology is studied. 研究了阴极弧等离子体沉积中第二阳极现象改善弧放电稳定性的作用。
- Boxman, R. L., Sanders D., Martin P. J., Handbook of Vacuum Arc Science and Technology,(1995). 林建宏，磁控溅射沈积铬基硬质镀膜高温氧化与机械性质研究，中兴大学硕士论文，(1998)。
- Direct current metal filtered cathodic vacuum arc(FCVA) and acetylene gas(C_2H_2) are wielded to synthesize amorphous carbon films on Si(100). 采用直流金属磁过滤阴极真空弧(FCVA)制造出Ti和乙炔(C2H2)气体的双等离子体在单晶硅(100)上制备非晶态碳膜.
- The forces applied on the molten pool at the cathode surface under the action of an ex-ternal magnetic field during vacuum arc coating are analyzed. 分析了在外加磁场作用下，真空电弧镀膜中阴极靶面液池的受力情况，导出了液滴喷溅特性受磁场影响的关系式。
- For subsonic state (ion) high current vacuum arc, with the increase of electrode separations, the loss of interelectrode plasma increases. 对于离子处于亚音速状态的大电流真空电弧，随着开距的增大，极间等离子体的损失增多。
- Finally the principle is studied on how the diameter of shield influences vacuum arc voltage,shield voltage and shield current. 最后研究了屏蔽罩大小对真空灭弧室电弧电压、屏蔽罩电位及屏蔽罩电流的影响。
- Amorphous diamond(a-D) films deposited by filtered cathodic vacuum arc(FCVA) technology with different substrate bias were investigated. 采用过滤阴极真空电弧技术,通过施加不同衬底偏压制备了非晶金刚石薄膜。
- Typical Moulds for Vacuum Arc Furnaces and Electroslag Remelting 真空自耗炉用特殊结晶器
- Base on this, in this work we prepared in situ TiC or (TiB+TiC)/Ti-1100 composites with various volume fraction of reinforcements by the consumable vacuum arc melting. 主要研究结果如下:在所制备的原位自生(TiB+TiC)或TiC/ Ti-1100复合材料中,增强体TiB、TiC分布均匀,与基体界面洁净,没有明显反应层存在。
- According to vacuum arc theory, the contact structure of vacuum interrupter is changed to produce magnetic field in the open space of the switching house. 根据真空电弧理论,人们通过改变真空灭弧室触头结构,使其开断时在断口空间产生磁场,以此来提高真空灭弧室的短路电流开断密度。
