您要查找的是不是：
- ultrasonic vibration method 超声提取方法
- Put forward a new kind of polishing method which compounded ultrasonic vibration with magnetic abrasive finishing (MAF) process. 摘要提出将超声振动附加于磁粒研磨过程中的思想。
- The method of ultrasonic vibration lapping on the spiral-bevels and hypoid gears was first presented. 提出螺旋锥齿轮超声振动复合研磨的方法,介绍了其原理;
- Taking ultrasonic vibration cutting (UVC) as an example, this paper puts forward a method of tuning automatically for ultrasonic vibration machining (UVM). 本文以超声波振动切削为例介绍了超声波振动加工中自动调谐技术的实现方法。
- Experimental studies have proved that the ultrasonic vibration honing method can effectively improve the surface quality of the internal-combustion engine internal cylinder's surface. 经实验研究证明，超声振动珩磨法可以有效提高内燃机汽缸内壁表面质量。
- Experiments of diamond turning of stainless steel are taken on a fine lathe by utilizing ultrasonic vibration. 对刀具的振动频率和振幅的影响进行了理论分析。
- During machining, ultrasonic vibration of workpiece can improve the machining process. 在加工过程中,通过超声波振动，工件加工工艺得到改善。
- Frequent ultrasonic vibration will immediately soften the pores, emulsify and clean dirt and residue. 频繁的超声波振动能在短时间内软化您的毛孔，乳化和清洁您肌肤上的脏物和残渣。
- Ultrasonic vibration electrical discharge machining (UEDM) in gas is proposed in this paper. 本文主题是关于气体保护超声波振动电火花加工(uedm)。
- A set of apparatus for production of alginate microspheres using vibration method was established. 建立了毛细管破碎装置制备海藻酸微囊。
- The linear density and unevenness of PET spun staple fiber were measured by vibration method. 介绍用振动仪测试涤纶原丝线密度及其不匀率。
- The results showed, the rhe- ology was best when the ultrasonic vibration time was 10min. 实验结果表明超声作用时间为10 min时流动性最好。
- The resonance of sonic wave vibration is the key technology in the ultrasonic vibration drilling. 超声振动钻削中声振系统的共振是实现超声振动钻削的关键技术问题。
- The results show that the mean grain size obtained by this electromagnetic vibration method is smaller than that of produced by CREM process. 实验研究了电磁振荡强度对晶粒细化的影响规律。
- The results show that the mean grain size obtained by this electromagnetic vibration method is smaller than that produced by CREM process.And ... 结果表明:电磁振荡法获得的晶粒尺寸要较CREM法所获得的小,且随着电磁振荡强度增加及频率降低,铸锭整体组织变得更加细小和均匀。
- The motion process of an abrasive grit during face grinding is analyzed based on the motion diagram of ultrasonic vibration assisted grinding. 根据超声振动辅助磨削运动图,分析了平面磨削时单颗磨粒的运动过程;
- Vibration Method: This method is measured by accelerometer probe vibration frequency of a way to pump method is simple, but relatively low sensitivity. 振动法：这种方法是通过加速度计探头测量泵体振动频率的一种方法，方法简单，但灵敏度较低。
- Cheng G M,Zeng P,Qiu X Y,et al.Study on ultrasonic vibration antifriction phenomenon[J].Piezoelectrics and Acoustooptics,1998,20 (5):322-325. [5]程光明;曾平;邱晓阳;等.;超声振动减摩现象的研究[J]
- Ultrasonic vibration technology was used to extract loosely sorbed phosphorus fraction in the sediments from Guanting Reservoir. 用超声技术提取沉积物样品中松散结合态磷,并与振荡提取结果进行比较。
