您要查找的是不是：
- transfer molding press 传递模压机,传递模塑压床
- Resin Transfer Molding(RTM) is the fast developing process for manufacturing fiber reinforced composite recently. 树脂传递模塑工艺(Resin Transfer Molding，RTM)是近年来纤维增强树脂基复合材料制备工艺中发展较快的工艺。
- And the effect of different molding press and different annealing system on the properties of foam glass was analyzed. 讨论分析了成型压力和退火制度等工艺过程对泡沫玻璃性能的影响。
- This paper addresses the Resin Transfer Molding (RTM) process.The governing equations of resin flow are presented. 介绍了RTM工艺过程及特点,给出了树脂渗流控制方程。
- Burkhard, F., Modeling of three-dimensional flow in injection and resin transfer molding processes, Ph.D. University of Delaware, (1993). 苏绍安，非印刷式背光模组光学模拟分析，硕士论文，中华大学电机工程学研究所，新竹(2001)。
- Putting hat on the lower mold and pushing the button , the lower mold uphold hat with steam and the upper mold press down crown and brim at the same time. 在下模具上放置帽子，按动开关，上模具下降，中模具上升，并同时喷射蒸汽，同时整烫。
- Considerable amount of work has been carried out on the development of resin transfer molding(RTM)as a viable processing alternative to autoclaving molding techniques . 树脂转移模塑工艺(RTM)产生以来,以其经济性优势开始替代热压罐的成形方法。
- The testpiece is then cured through Resin Transfer Molding(RTM) process.The sensing performance of the braided optic fiber,under bend loads is also studied. 将光纤成功地编入三维编织复合材料试件并通过树脂传递模塑(RTM)工艺成型。
- In this paper,the principle of Resin Transfer Molding (RTM) technology for composite processing is introduced,and the requirement of the resins for RTM is discussed. 简要介绍树脂传递模塑工艺(RTM)的基本原理、优点及适用树脂的特性；
- The results of the water-surrounding rubbing wear experiments on the ZrO2 ceramics with various molding press indicate that the compact with a molding press of 150 MPa possesses a low wear rate and a favorable abrasive wear resistance. 对不同成型压力条件下的ZrO_2 陶瓷进行了水环境下的摩擦磨损试验,结果表明本试验条件下ZrO_2 陶瓷磨损机理为沙粒冲击形成的裂纹经扩展形成凹坑,使试样受到磨损,150MPa 压力下ZrO_2 陶瓷具有较低的磨损率,抗摩擦磨损能力好。
- The soakage of the three materials system of TDE-85 epoxy resin, diallyl isophthalate(DAIP) and E-51 epoxy resin in vacuum assistant resin transfer molding(VARTM) for high performance radome was studied. 研究了采用真空辅助树脂传递模塑 (VARTM )工艺制造高性能机载雷达罩的TDE - 85环氧树脂、间苯二甲酸二烯丙酯 (DAIP)和E - 5 1环氧树脂三种材料体系的浸润性能。
- A mathematical model of resin flow and temperature variation in the filling stage of the resin transfer molding (RTM) is developed based on the control volume/finite element method (CV/FEM). 用控制体/有限元方法建立了树脂传递成型工艺过程中树脂流动和温度变化的数学模型。
- We can produce more than 10 varieties of products in 6 categories, including knurling, relievo, printing, spraying, vertical mold pressing, etc. 生产滚花、浮雕、印刷、喷涂、立体模压等六大类十几个品种。
- The polymethylsiloxane(PDMS) mixers used in optical evaluation were fabricated by mold pressing. 利用模压工艺制作出适于光学探测的聚二甲基硅氧烷（PDMS）混合器。
- rotary compression molding press 旋转式压缩成型机
- The aerofoil rib parts for pilotless aircraft was manufactured by using mold pressing process with epoxy resin as matrix materials and glass cloth as enhancement materials. 以环氧树脂为基体,以玻璃布和碳布为增强材料,采用模压成型工艺制备了某型无人机机翼环肋复合材料结构件。
- It's made of bronze or iron powder, mold pressed in high pressure, sintered in high temperature and soaked in oil by vacuum. 该产品于是以铜粉或铁粉为原料，经模具压制、高温烧结、真空浸油后加工而成。
- Vacuum-Assisted Resin Transfer Molding (VARTM) 真空辅助树脂传递注塑（VARTM）
- A tough, but low abrasion carbon fiber packing impregnated with PTFE and twined through advanced twining techniqure of wick-penetrating, then carbonized or mold pressed. 以特殊工艺的碳纤维为骨架，以耐腐蚀性极强的PTFE为基材，采用国内最先进的穿芯式编织法，编织成致密结构织物，经碳化、烧结、模压制成的各种形式的密封环。
- Short carbon fiber reinforced pitch-based carbon/carbon composites (SCFRC) with high density and low cost were fabricated by mold pressing followed by semi-carbonization. 摘要利用模压半炭化成型工艺在大气环境下制备出了短切炭纤维增强沥青基C/C复合材料（简称SCFRC）。
