您要查找的是不是：
- It also expands boiler house efficiency and flexibility by distributing total heat input amongst boilers and maintains a wide steam production range. 同时增加锅炉房的效率和灵活性，将总的热输入量分配各个锅炉，保持大范围蒸汽生产。
- Achieve continuous balance between produced and consumed steam. This master pressure control approach controls total heat input into boilers, as well as total steam flow into each header. 实现产出和消耗蒸汽的连续平衡。主压力控制方法控制着输入锅炉的总热量以及流入每个锅炉联管箱的蒸汽量。
- total heat input 输入总热量
- Fig.6 The effect of heat input on the UTS of the TIG welded joints. 图6线能量与钨极氩弧焊焊接接头极限抗拉强度的关系。
- The total heat transmission change with temperature is lineate. 夹套与外界的总换热量随壁温的变化呈近似线形变化规律；
- It is found that the height of dryout point decreases as heat input increases. 研究结果表明，理论模型的计算结果与实验结果比较吻合;
- Weld whose heat resource is the laser, also owns the advantage such as low heat input and small heat deform. 以激光为热源的焊接同样也可以得到低热输入、变形量极少的效果。
- Fig.9 The effect of heat input on the average microhardness of both the HAZ and FZ. 图9焊接线能量与焊接接头熔合区和热影响区微观硬度的关系。
- Analyses the operation effect of total heat exchangers applied to emporium area. 分析了商场部分全热交换器的应用效果。
- Based on total heat exchange factor method,the online control process for reheating furnace was studied by simulation. 以总括热吸收率法为基础,对连续加热炉在线控制过程进行了软件仿真研究。
- The experiments show that laser welding with filler wire Alsi12 cna minimize hot crack due to the smallest amout of heat input into the ease material. 工艺实验表明 ,采用填充焊丝AlSi12激光焊接可有效抑制热裂纹的产生
- His total heat output was measured and compared with the calorific content of the food he ate. 量出他的总热量输出,并与他吃进去的食物的含热量作了比较。
- The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser. 固体热载体煤气化的热量靠提升燃烧产生。
- Abstract: The feature of new developed HSLA steels for large heat input welding with low susceptivity to weld cracking was presented. 摘 要: 简要叙述了新研制的大线能量焊接低焊接裂纹敏感性调质高强度钢的特点。
- There is some about that retarders or retarding plasticisers really alter the total heat output or, for that matter, the rate of heat generation. 无疑地，缓凝剂或缓凝塑化剂确实改变了点总放热量或放热速度。
- The operating frequency mainly depends on the length of system, while the amplitude depends on the heat input and stack position. 谐振频率主要受系统的长度影响，而声波振幅则与输入功率及板叠在谐振管中的相对位置相关。
- So it was concluded that lower heat input and suitable preheated temperature should be adopted to control grain size and microstructure morphology. 因此为提高焊接粗晶区的韧性，应采用小线能量和合适的预热温度来控制晶粒尺寸和组织形态。
- It was point out that the entropy generation was minimized when the total heat transfer area was divided equally at each stage. 基于熵产生最小对多背压凝汽器进行了优化分析，指出各级传热面积相等时熵产生最小。
- So the heat input should be kept low to weld galvanization steel sheet.In this paper the MIG welding machine is adopted with special sold... 因此,焊接镀锌板一定要减少热输入量,采用特殊的钎焊材料和性能优良的MIG焊机进行焊接。
- The air equipment is different from those on sale,it uses air-to-air total heat exchanger to prevent frosting and dewing. 该通风设备与当今市场上销售的通风设备不同,采用全热交换防结霜、结露措施。
