您要查找的是不是：
- torsional shearing test 扭矩剪艽试验
- torsional shear test 扭转剪切试验
- torsion shear test 扭剪试验
- cyclic torsional shear tests 循环扭剪试验
- In order to study the correlation between shear wave velocity of soils and their triaxial shear test mechanics index,a new transducer is developed on the basis of torsion vibration principle. 为了研究土的剪切波速与其三轴剪切试验力学指标之间的关系,依据扭剪振动原理,开发出一种测试三轴压力室内土样剪切波速的传感器。
- Standard compaction test and undrained direct shear test were carried out. 实验方式是采取标准压实试验及不排水直接剪力试验。
- It is very complicated to analyze prestressed concreted curved box girder due to many factors such as tendon, bending、 torsion 、 shear lag and wrapping. 预应力混凝土曲线箱梁桥,由于受到空间预应力束、曲箱梁的弯曲、扭转及截面剪力滞、畸变等因素的影响,受力十分复杂。
- Shearing test on 72 cube specimens with cutting groove bonding has been done, and the experiment results are given and have been analyzed. 摘要对72个沟槽式新老混凝土粘结试件进行了抗剪试验，给出了试验结果，并对其进行了分析。
- Our main products are: steel structure with large hexagon head bolts, weld screws (studs), wind energy towers barrel bolts, torsion shear bolts, anchor bolts, universal bolt, double-headed bolts. 公司主要产品有：钢结构用大六角头螺栓，焊钉(栓钉)，风电塔筒螺栓，扭剪螺栓，地脚螺栓，通用高强度螺栓，双头螺栓等。
- Variation Rule of Shear Strength Index When Direct Shear Test of Coarse-grained Soil. 粗粒土直接剪切试验抗剪强度指标变化规律。
- It is presented an experimental study on the bond behavior of NSM CFRP strips using a simple shear test set -up. 通过CFRP板条嵌入混凝土试块的界面单剪试验,研究粘结长度对界面粘结性能的影响。
- Finally based on the analyzing of shear test data, classification and development pattern, this paper puts forward an index value of shearing strength. 最后在分析抗剪试验资料和分类及发育规律的基础上，提出了抗剪强度指标的建议值。
- Simple shear test shows that there is a shear zone in soil nearby the contact surface, in which the shear dilation/compression effect exists during shearing. 接触面单剪试验显示，在土与结构接触界面土体一侧存在剪切错动带，剪切过程中的土尤其是粗颗粒土出现明显的剪胀/剪缩效应。
- triaxial torsional shear apparatus 三轴扭剪仪
- Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic. 最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
- self-boring type torsion shear apparatus 自钻式扭剪仪
- The characteristic values of micro shear test and tensile test of aluminium alloy were determined and the quantitative expression of these characteristic values were studied. 通过测定铝合金微型剪切试验和拉伸试验的性能参数,研究得出了这些性能参数之间的数学关系式。
- The interlaminar shear strength of the composites was characterized by a short beam interlaminar shear test and a double edge-notched tensile shear test. 短梁剪切失效模式为假塑性，而拉剪失效模式为非假塑性破坏。
- At present, the conventional rock body mechanical test comprises a unidirectional compression test, a unidirectional tension test, a triaxial compression test and a shear test. 目前常规的岩体力学试验主要有单向压缩试验，单向拉伸实验，三向压缩试验，和剪切试验等。
- M.Mahaney, M.Shell, R.Storde, 1991, Use of the in-process bond shear test for predicting gold wire bond failure modes in plastic packages, IEEE IRPS, pp44-51, 1991. 陈永庆，2005，应用反应曲面方法求解封装焊线制程微细间距之最佳参数，硕士论文，国立中原大学，中坜。
