您要查找的是不是：
- Experimental Research on Tooth Trace Error Resulting from Index Change Gears of Hobbing Machine 滚齿机分度挂轮引起齿向误差的实验研究
- Experimental research on tooth trace error resulting from differential change gears of hobbing machine 滚齿机差动挂轮引起齿向误差的实验研究
- Keywords Crowned tooth Tooth error Tooth trace error Curvilinear figures of the designing tooth profile and trace Actual profile Position error; 鼓形齿;齿形误差;齿向误差;设计齿形曲线图;设计齿向曲线图;实际形状;位置误差;
- tooth trace error 齿向误差
- In this meantime, also introduces the relative tooth and trace error &tolerance zone, designed tooth and trace, the curvilinear figure of the designing ... 同时,文中还介绍了与此相关的齿形、齿向误差及公差带,设计齿形、齿向和设计齿形、齿向曲线图。
- In this meantime, also introduces the relative tooth and trace error &tolerance zone, designed tooth and trace, the curvilinear figure of the designing tooth &trace. 同时，文中还介绍了与此相关的齿形、齿向误差及公差带，设计齿形、齿向和设计齿形、齿向曲线图。
- The Trace Error command requires that the active cell contain an error value. “追踪错误”命令只适用于含有错误值的活动单元格。
- Tracing error and informational messages only. 只跟踪错误和信息消息。
- Tracing error and warning messages only. 只跟踪错误和警告消息。
- The Circular -Arc-Tooth-Trace gear with double arc flank profile has the tooth trace of CATT gear and the tooth flanks profile of double circular arc gear, therefore the gear is convex-concave engaging in both flank profile and tooth trace. 圆弧齿线双圆弧齿轮是采用双圆弧齿轮的齿廓和圆弧齿线圆柱齿轮的齿线而形成的新型齿轮,独特的凸凹啮合齿线和凸凹啮合齿廓,使其齿面接触强度和轮齿弯曲强度都得到了很大提高,是一种应用前景十分广阔的新型齿轮。
- The Error Tracer has encountered a branch point. Double-click the branch you want to follow and choose Trace Error again. “错误追踪器”遇到分支点。请双击要选定的分支，再选择“追踪错误”命令。
- The Error Tracer encountered existing arrows or a circular reference. Delete all tracer arrows or resolve the circular reference, and then choose Trace Error again. “错误追踪器”遇到已存的追踪箭头或循环引用。请清除所有的追踪箭头或解决循环引用后，再选择“追踪错误”命令。
- Arcuate Tooth Trace Cylindrical Gear 弧齿线圆柱齿轮
- The authors proposed a high-efficiency CNC generating method for cylindrical gear with arcuate tooth traces, by means of a standard hob and studied the bobbing mechanism. 摘要提出了一种利用标准齿轮滚刀滚切圆弧齿线圆柱齿轮的数控加工方法。
- The authors proposed a high-efficiency CNC generating method for cylindrical gear with arcuate tooth traces,by means of a standard hob and studied the hobbing mechanism. 提出了一种利用标准齿轮滚刀滚切圆弧齿线圆柱齿轮的数控加工方法。
- Next, in order to reduce the tracing error, a suitable nominal parameter needs to be chosen. 同时为了减小追踪误差，本篇论文将运用一具有信度学习能力的小脑网路，来学习强健控制器中的标准参数。
- I was given gas when they pulled my tooth out. 给我拔牙时用了一氧化二氮。
- Cutting Studies on Circular Arc Tooth Trace Gear with Double Arc Flank Profile 圆弧齿线双圆弧齿轮的切齿试验研究
- A film of mucus and bacteria on a tooth surface. 齿菌斑牙齿表面一层粘液和细菌的膜
- This tooth is sensitive to cold. 这颗牙对冷过敏。
