您要查找的是不是:
- Calculation and Optimization for Tooth Contact Stress of Spiral Bevel Gears 航空弧齿锥齿轮齿面接触应力计算与优化
- tooth contact stress 齿面接触应力
- A tooth contact analysis model with a rotating freedom was developed by coupling freedom method to determine the stress and strain field of gears. 摘要利用自由度耦合方法建立了县有旋转自由度的齿轮接触模型,用以分析齿轮的应力应变场。
- When paged, subjects completed a brief questionnaire containing rating scales of jaw pain, masticatory muscle tension, time and intensity of tooth contact, mood and stress level. 记录时,参与者要完成一份简短的问卷,包括下颌疼痛等级、咀嚼肌紧张度、牙齿接触的时间和强度、情绪和压力水平。
- Simulation test of packer rubber-casing wall contact stress. 封隔器胶筒对套管接触应力模拟试验研究。
- This method is also applicable to solving contact stress and residual stress. 该方法同样适用于解决接触应力和残余应力问题。
- The sealing contact stress is an important parameter of sealing capability. 密封接触应力是影响密封性能的重要技术参数。
- The tooth contact and kinematic precision of the modified worm gearing with manufacturing errors has been investigated by the TCA method. 用齿面接触分析法求解了存在制造误差时修形传动的齿面接触状态和运动精度。
- The computational models for tooth contact analysis (TCA) and loaded tooth contact analysis (LTCA) of the face gears were established. 建立了直齿面齿轮副轮齿接触分析(TCA)和承载接触分析(LTCA)的计算模型。
- Beased on the theory of Hertz stress, the contact stress of roller bearing is analysed in this paper. 摘要依据赫兹接触强度计算理论,着重研究了圆柱滚子轴承内、外圈及滚动体的接触应力。
- On the basis of the first envelope ,the paper stresses on the tooth contact analysis of the second envelope,and the equations of a worm and a wormwheel flanks are derived . 本文在第一次包络的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。
- Check ring gear and pinion gear teeth contact pattern. 检查环形齿轮齿接触印痕。
- It is difficult to research the contact stress in the seal interface with fitting and using seal components. MARC,建立了橡胶O形密封圈和油封轴对称有限元模型,对其安装和使用过程中的接触变形、接触宽度上的接触应力分布等进行了分析,从而为进一步可靠设计、优化橡胶密封件提供了理论依据。
- The distribution of the contact stress of FG is obtained in the different meshing locations during the meshing. 获得了在啮合过程中不同的啮合位置面齿轮的接触应力的分布规律。
- If the conical angle difference is too large, the anchorage length will minish and the contact stress of CFRP bars will increase. 锚具长度越长,对碳筋的受力越有利,碳筋所受接触压应力的峰值也越小;
- Based on the coordinate transformation method and gearing theory, the mathematical models for generating the rack cutter, pinion, face-gear, as well as Tooth Contact Analysis (TCA), are established. 应用座标转换法与齿轮啮合原理,本文已导出创成齿条齿面数学模式、小齿轮齿面数学模式、面齿轮齿面数学模式、齿面接触分析数学模式及控制抛物线运动误差大小之统御方程组。
- Finally failure criteria of the maximum contact stress and shear stress of "O"-type rubber s ealing ring was determined. 最后,确定了“O”形圈密封结构的最大接触应力和剪切应力失效准则。
- When the working load is large, the contact stress between cam surface and follower ends becomes the main cause of cam mechanism failure. 当工作载荷较大时,凸轮表面和从动件端部的接触疲劳破坏就成为凸轮机构失效的主要形式之一。
- The contact stress is reduced,the life of the wheel,roller and bearings is prolong,it makes autocontrol easy and increases rotate speed of kiln. 降低了接触应力,提高了轮带、托轮和轴承的寿命,便于实现自动控制和提高窑的转速。
- An appropriate FEM is established for the analysis of the connections between the levelling force and the distribution of roller contact stress. 通过某热轧厂厚板矫直机矫直力测试,在开卷区域和精矫区域分段独立测试了各种规格不同工况的69个钢卷。
