您要查找的是不是：
- However, tool wear is high in USM, due to the abrasive cutting action. 但是,由于usm是磨削加工,因而刀具损耗大。
- The effects of vibration parameters on the surface roughness and the tool wear are analyzed. 研究了不同振动参数对工件表面粗糙度和刀具磨损量的影响规律。
- Acoustic Emission(AE) is a useful and effective technique in tool wear monitoring. 声发射技术是刀具磨损监测的一种新方法。
- Experimental results indicate that pulse current causes denser deposit, which leads to the decrease of EDM tool wear ratio. 当电铸层作为电火花加工电极时，脉冲电流电铸可以降低电极损耗率。
- The feature and the mechanism of tool wear for turning powder superalloy with cubic boron nitride (CBN) bite are researched in this paper. 研究了用立方氮化硼(CBN)刀片车削粉末高温合金的刀具磨损特征及刀具磨损机理。
- Tool wear automatic monitor is one of the key techniques in modern manufacture and is one of the preconditions,which ensure the automatic machining. 刀具磨损的自动监测是现代制造技术的关键技术之一,是保证自动化加工顺利进行的前提之一。
- Cutting temperature has direct effects on not only tool wear and tool life but also machining accuracy and quality of machined surfaces. 切削温度不仅直接影响刀具的磨损和耐用度,而且也影响工件的加工精度和已加工表面质量。
- The research shows that work hardening is large at the broaching surface depth and the main factor affecting broaching HSS tool wear. 试验结果表明:拉削表层加工硬化程度和深度都较大;是高速钢拉刀磨损的主要原因。
- The main factors which affect the tool wear and cutting temperature is also tested and the cutting temperature conversation law is validated. 对影响刀具磨损和切削温度的主要因素也进行了单因素的试验，验证了切削温度守恒定律。
- Detecting and testing for tool wear; tool life; protective coatings; dimensional wear, tool damage, fracture and failure; wear mechanisms, patterns and characteristics. 工具磨损的检验与测试;工具寿命;防护涂层;尺寸磨损、工具损伤、破裂与故障;磨损机制、样式和特征。
- Cutting temperature is the important factor which directly affects the cutting tool wear, workpiece surface integrity and machining precision in high speed machining. 高速切削过程中切削温度对刀具磨损、工件加工表面完整性及加工精度有极大的影响。
- In the course of high speed cutting of titanium alloy, the temperature of cutting zone is very high, which accelerates tool wear so that cutting speed is more restricted. 摘要在钛合金的高速切削过程中，切削区温度很高，加速了刀具的磨损，限制了切削速度的进一步提高。
- An analysis and research are made on the techniques of monitoring the tool wear state and its compensation in EDM milling. Compensating strategies for the tool wear are proposed. 对电火花铣削加工中电极损耗状态的获得及其补偿技术进行了分析研究，提出了电极损耗的各种补偿策略。
- As the results, the diamond cutting tool was characterized by different features in turning different materials. It was suggested to abate the cutting tool wear under reduced oxygen environment or using oxygen free coolant in turning of copper. 结果表明 ,为了减轻甚至消除金刚石刀具的磨损 ,在切削铜时应使用少氧或无氧的切削液 ;
- It was a freak of mine to wear pink pajamas. 穿上粉红色睡衣是我一时的奇想。
- The experimental results indicate that cryogenic nitrogen gas jet with minimal quantities of lubricant is the most effective cooling and lubricating mode to reduce milling force and to retard tool wear. 试验结果表明，低温氮气射流结合微量润滑能够最有效地降低铣削力，抑制刀具磨损。
- It advances that the non-lapping envelope region is a major fact of generating roundness errors and inquires into the effects of ball roundness with non-lapping envelope region, preliminary pressure error and lap tool wear. 根据四研具体对球面研磨的包络原理，提出了未包络研磨区是产生残存圆度误差的主要因素，并探讨了未包络研磨区、四研具初始压力误差、研具磨损不均匀性产生的原因和对研磨残存圆度误差的影响及解决措施。
- Instructions for using the tool can be found in the compendium. 在手册中可以找到这个工具的使用说明。
- The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics. 对氟金云母可加工陶瓷进行车削加工试验,分析了切削中的刀具磨损特性,讨论了影响刀具磨损率的因素。
