您要查找的是不是：
- Tire contact pressure distribution 轮胎接地压力
- Development of Static Measuring Device for Tire Contact Pressure 轮胎接地压力静态测试仪的开发
- Measuring Tire Contact Pressure Distribution of Light Vehicle 轻型货车轮胎接地压力分布实测
- Finite element analysis for effects of stable rotational speed on bias truck tire contact pressure 旋转速度对恒速转动载重斜交轮胎接触压力影响的有限元分析
- tire contact pressure 接地压力
- The contact pressure distribution and the shape of contact area in vertical state and camber state of tire are measured by pressure sensitive films, respectively. 实时记录了试验中轮胎受力与变形关系,并采用压力敏感膜测量了轮胎在垂直状态及侧倾状态接地区域内的压力分布状况。
- Contact pressure increase by 1.5 - 5 with same stems and yokes. 即使采用相同的阀杆和轭架;接触压力也能够增加1.;5至5倍。
- The perfect camber design can be obtained by introducing the center/side ratio concept of contact pressure and choosing proper ratio. 同时引入辊间接触压力的中、边部比值概念并作合理选择，使设计出的辊型更加完善。
- The high contact pressure and the choice of different electrical contact materials enable high currents to be switched reliably. 高接点压力和选择不同的电接点材料能可靠地控制大电流。
- The difference between the PFL and FFL is not obvious for large tensile stresses and so does the effect of the contact pressure on the FFL. 当拉应力较大时，微动疲劳寿命（FFL）与普通疲劳寿命（PFL）相差不大，法向压力的影响不明显；
- Sufficient contact pressure generated by the torque is essential. A small increase in contact pressure produces a rapid decrease in leakage. 通过扭矩产生充足的接触压力是重要的。接触压力的稍微增加，可以迅速减少泄漏。
- In this paper, the residual contact pressure of hydraulically expanded joints of tube to single tube model of heat exchangers is investigated. 采用液压胀接技术，对换热器液压胀接后管子与单管模型的残余接触压力进行了研究。
- The application results show that the distribution of roll contact pressure was meliorated, and the life of the backup roll was improved. 结果表明，优化后的辊型曲线改善了辊间压力的分布情况，降低了轧制末期工作辊边部对支撑辊的磨损，提高了支撑辊轧制质量。
- More detailed thermographic testing on an annual basis is required to ensure that contact pressure does not deteriorate over time. 更详细的温度测试，每年需要，以确保接触压力并不恶化一段时间。
- The man jacked up his car to fix a flat tire. 那人用千斤顶把他的汽车顶起以修理漏气的轮胎。
- The calculating formulas related the residual contact pressures to hydroform... 结果表明该装置结构及其计算方法适于工程应用。
- It can be concluded that the diameter of the tubesheet has little influence on the contact pressure and the residual contact pressure. 得出液压胀接时管板外径对胀管的接触压力和残余接触压力影响不大等结论。
- Hence, an increasing of CoF could reduce the slip distance and increase the friction stress but does not ensure a decreasing in peak contact pressure. 因此，摩擦系数增加，能减少滑动距离和增加摩擦应力，但不能确定最大接触压力的减少。
- I got a flat tire of the rear wheel of my bicycle. 我自行车的后轮车胎没气了。
- The inexpensive tried and tested Bourdon tube system coupled with a modern modular principle provides a very reliable yet inexpensive contact pressure gauge. 经过测试和使用的波登管系统价格便宜,采用现代化的模块原理,是一个可靠的价格合理的接点压力表。
