您要查找的是不是：
- When fabric is made up to be garments or home textiles,the mechanical property of the fabric decides their drape. 织物面料制成服装或窗帘等家居用品后,其力学性能构成悬垂性。
- The mechanical property and grain size shall conform to the requirement in table 4. 机械性能和晶粒度应满足以下表4中的要求。
- The mechanical property and heat-resistant property of the three kinds of in-situ composite is mainly introduced. 重点介绍了这三类复合材料的力学性能和耐热性能。
- When fabric is made up to be garments or home textiles, the mechanical property of the fabric decides their drape. 摘要织物面料制成服装或窗帘等家居用品后，其力学性能构成悬垂性。
- The effects of nano-CaCO3’s surface property on the mechanical property of PP composites were also studied. 讨论了纳米CaCO3粉体的表面特性对PP复合材料力学性能的影响。
- The mechanical property of composite of oil-extended SEBS with filler compound was studied via melt extrusion. 采用熔融共混方法研究了碳酸钙填充充油SEBS复合材料的力学性能的影响。
- The size and shape of Sip also affected the mechanical properties. 初生硅颗粒的尺寸、形貌对Sip/ZA27的力学性能也产生影响。
- The article studies the mechanical properties of PTT staple fibers. 研究了PTT短纤维的力学性能。
- The coupling agent can improve the bonding strength of the adhesive-metal interface and the mechanical property of the epoxy silicone adhesive. 硅烷偶联剂能改善胶层与金属界面的胶接强度，提高环氧有机硅胶粘剂的拉伸剪切强度。
- The good corresponding relationships among the SiC content, the microstructure and the mechanical property of the FGM are obtained. 功能梯度材料的微观结构和力学性能等都与材料成分梯度分布之间有很好的对应关系。
- The influence of double aging low temperature hardening transformation(LTHT) on the mechanical property of Al Mg Si RE alloy was studied. 研究了双重时效的低温形变热处理（LTHT）对Al?Mg?Si?RE合金力学性能的影响。
- The mechanical property of AZ31 magnesium alloy rolling sheet under different temperatures and strain rates was studied through uniaxial tensile test. 通过单向拉伸试验研究了AZ31镁合金轧制板在不同温度和应变速率下的力学性能。
- The mechanical property of steel cord which isn't up to standard can be adjusted obviously with STC re-reeler designed by oneself. 自行设计的STC重卷机对于调整力学性能不合格的钢帘线产品效果显著。
- Results We got the mechanical property indices of each group on the proneness, aback loll, axial compression, torsion, stress relaxation and creep. 结果得出了各组标本前屈、后伸、轴向压缩、扭转和应力松弛、蠕变力学性能指标。
- The effects of isocyanurate group on the mechanical property and solvent resistance property of PU elastomers are investigated by changing NCO content. 通过改变NCO含量考察异氰脲酸酯基团对聚氨酯弹性体的力学性能及耐溶剂性能的影响。
- The mechanical property and technological performance of newly developed Al-Si-Cu-RE series diecasting alloy were surveyed. 综述新研制出的铝硅铜稀土系压铸合金的力学性能、工艺性能。
- The mechanical properties of SCM whisker/HDPE composite were investigated. 摘要研究了矽钙镁晶须（SCM晶须）／高密度聚乙烯(HDPE)复合材料的力学性能。
- In order to improve the mechanical property of nylon 1010,natural mineral filler tremolite is melt and mixed with nylon 1010 to fabricate a composite. 为提高尼龙1010的力学性能,将天然矿物填料透闪石与其熔融共混制成复合材料。
- CONCLUSION: The mechanical property indices of tendon to tendon suture are remarkably larger than tendon and unfold tendinous membrane suture. 结论：腱与腱缝合组力学性能指标显著大于腱与展腱膜缝合组。
- Therefore, the nitrogen-PIII is regarded as one of the promising technologies for improving the mechanical property and RCF life of bearing. 因此，氮等离子体浸没离子注入被认为是一种很有前景的改善轴承疲劳寿命和综合机械性能的表面改性方法。
