您要查找的是不是：
- The spatial computation model of a cable bridge was established by the finite element program MIDAS. 索道桥是以钢丝绳为主要受力构件的一种柔性悬索体系桥梁。
- The finite element program ABAQUS was applied to study the numerical simulation of failure process of steel frame-RC corewall hybrid structure. 摘要利用ABAQUS通用有限元程序对钢框架-钢筋混凝土核心筒混合结构的破坏过程进行了数值模拟。
- The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program. 4、用通用有限元分析软件ANSYS建立了混凝土轴心和偏心受拉的有限元模型，进行分析并得到了受拉构件的应力云图、变形图及开裂图，并与理论分析结果进行了比较。
- The finite element program design method has laid a solid foundation for in depth reseach of physical thoracic impedence rheogram wave form. ? 该程序设计方法为进一步深入研究人体胸腔阻抗血流图波形的成因打下了基础。
- The plate subjected to underwater explosions was simulated by the finite element program LS-DYNA, then the results were analyzed and the maximum stress was obtained. 采用有限元程序LS-DY-NA对水下爆炸载荷作用下的钢板进行仿真计算，对计算结果进行分析，得到板的最大应力值；
- A simple model for the finite element analysis of piled raft foundation is prosposed and this calculational process is realized by the finite element program ANSYS. 提出一种有限元简化模拟桩筏基础体系的计算模型,利用有限元软件ANSYS实现这一计算过程。
- It has been analyzed the vibration status and energy response of a five-floor shear structure with and without FPS isolator using the finite element program. 摘要以一个摩擦摆隔震五层剪切型结构为例，采用有限元分析程序，计算分析了隔震与非隔震上部结构振动状态和能量响应规律。
- Thereby, this paper takes the guangzhou xinguang bridge as engineeringbackground and the behavior of statics and dynamic of steel arch bridge is analysedby the finite element program. 本文以广州市新光大桥为工程背景，应用通用有限元程序分析了大跨度中承式钢拱桥的静、动力特性。
- The responses of asphalt pavement to static and dynamic FWD load are analyzed by using the finite element program ABAQUS,to try to find the inertial point in the surface deflection basin. 采用有限元程序ABAQUS分别计算静载和动载作用下沥青路面的FWD理论弯沉盆,寻找理论弯沉盆中的惰性点,并与基于弹性层状体系理论计算回归公式得到的惰性点进行比较。
- Through the finite elemental program of ADINA, a three-dimensional model of high slopes of Geheyan Power Station was established. 摘要以有限元计算程序ADINA为平台，建立隔岩电站厂房高边坡的三维模型。
- The Finite Element Methods Vol.1 5th ed. 有限元法第1卷第5版。
- Using the finite element analysis software MSC. 摘要采用有限元分析软件MSC.
- This model helps to make a non-linear finite element program which is tested and verified by the example in UMT. 在此基础上，建立了城市轨道交通桥梁无缝线路纵向力的空间一体化力学模型，编制了非线性有限元模型，通过实例进行了模型验证。
- Physical insight is valuable in using the finite element method. 在利用有限方法时，物理上的观点是有价值的。
- The finite element method theory and applications II. 有限单元法原理与应用2。
- This method agrees well with the finite element method. 本文方法和有限元方法基本吻合。
- Based on classical consolidation theory developed by BIOT,3-D finite element program coupling deformation and pore-pressure is coded. 根据经典比奥固结理论,编制了可以考虑孔压、位移耦合的三维有限元程序。
- The finite element modal analysis of fan axis is discussed. 对某鼓风机轴有限元模型进行了模态分析。
- Planar triangular finite element program can be used to calculate the displacement, stress. 平面三角形有限元程序，可以用来计算位移，应力。
- The foregoing examples suggest some advantages of the finite element method. 从上述例子可看出有限单元方法的某些优点。
