您要查找的是不是：
- tensile yield point 拉伸屈服点,拉力屈服点
- The influence of thermal oxygen on the tensile yield stress, tensile breaking stress, impact strength, elongation at break , melt point and the heat of melting of PF Nylon 1212 is investigated. 通过热氧老化试验,考察了热氧对尼龙1212拉伸屈服应力、拉伸断裂应力、冲击强度、断裂伸长率、熔点、熔融热的影响。
- The results showed that the Vicat softening temperature and the tensile yield strength were improved with the increase of CPVC content. 结果表明,共混材料的维卡软化温度和拉伸屈服强度随CPVC用量的增加而增加;
- The results showed that the Vicat softening temperature and the tensile yield strength were improved with increasement of CPVC content. 结果表明,共混材料的维卡软化温度和拉伸屈服强度随CPVC用量的增加而增加;
- The results showed the Vicat softening temperature,tensile yield strength and melt viscosity of the blend increased with the increase of CPVC content. 结果表明：共混物的维卡软化温度、拉伸屈服强度和熔体粘度随CPVC用量的增加而明显增加；
- The results show that the influences of the glass beads content and its diameter on the tensile yield stress and strain at yield are not significant. 结果显示,微珠含量及其直径对复合物的拉伸屈服应力和屈服发生时的应变影响不太明显。
- The tensile yield stress and flexural stress are much higher in the composites containing compatibilizer than the composites with coupling agent treated CaCo3. 另外，也将相容剂法与传统的偶联剂法进行了比较。
- It was observed that the lower yield point was subject to a greater degree of scatter than that of the upper yield point. 业已观察到下屈服点比上屈服点易产生更大的散布度。
- The yield point represents the dividing line or transition from the elastic to the plastic region of the curve. 屈服点是弹性变形区域到塑性变形区域之间曲线的过渡点。
- The yield point,quality grade and deoxidation are used to express the brands of steels, which reflects the features of engineering structural steels. 钢的牌号表示方法改为用屈服点、质量等级、脱氧程度表示，反映了工程结构钢的特点，便于使用选材。
- The conventional photoelastic modes and procedures suffice to indicate whether or not the yield point of the material of the prototype will be exceeded. 常用的光弹性模型和方法能够指明原型材料的屈服点是否将被超过。
- In order to ensure that the structure is stable, the working stresses are kept well below the yield point or the proof stress. 为了保证结构稳定，工作应力应很好地保持在屈服点或弹性极限以下。
- The effects of the filler size and content on the tensile yield behaviour of LDPE componnd filled with glass beads were investigated by INSTRON materials tester at room temperature. 应用Instron材料试验机,考察了室温下微珠大小及含量对填充LDPE复合物拉伸屈服行为的影响。
- This paper analyzed several excellent types of low yield point steel damper,including their principles,configurations,characteristics. 研究了具有高塑性低屈服点的减震器用钢化学成分、冶炼、轧制、组织和性能。
- Casing is heated by steam in thermal recovery wells.There are thermal stresses in casing.Casing deforms when stresses exceed yield point. 计算表明,注蒸汽稠油井如果用常规方法固井,在通常的注汽温度下,套管都因热应力而产生屈服变形。
- As with dispensed SMAs, the theological properties of the adhesive, including its yield point, play a significant role in the dot profiles produced by stencil printing. 模板印刷中，胶粘剂的流变性能以及屈服点等因素会显著影响表面贴片胶胶点形貌特性。
- The table shows the yield points of the three SMAs used in this study. 上表列出了此项研究中所采用的3种贴片胶的屈服点。
- The results showed that cast nylon modified with laurolactam could produce heavy plasticity deformation without brittle destruction af-ter the tensile yielding. 结果显示:改性浇铸尼龙材料拉伸屈服后能够产生很大的塑性形变,不会发生脆性破坏。
- The results show that the appearance of Widmanstatten structure,upper bainite and martensite in the structure of 20MnSi HRB is the main cause making the yield point disappear. 结果表明,魏氏组织较多、轧制缺陷及夹杂物过多是造成脆断的主要原因,并提出了相应的解决措施。
- An experimental and theoretical study of the earthquake mitigation effect of hysteretic dampers using ultra low yield point steel was presented in this paper. 本文通过试验研究和理论分析探讨极低屈服点软钢阻尼器的减震效果。
