您要查找的是不是：
- Such thermocouples were tried to recordcontinuously the temperature of liquid steel during smelting in anopen hearth furnace and a Bessemer converter, With encouragingresults. 这种热电偶曾在平炉和转炉中进行过钢水连续测温试验,结果出现了乐观的现象。
- It could reduce the temperature of tapping and ANS refining, the transmission temperature lowering of liquid steel, and the OB rate of ANS refining. 通过优化炼钢系统温度,可以降低出钢温度、ANS精炼搬出温度、钢水传输温降和OB率。
- Prediction model on post-tapping temperature of liquid steel in ladle 转炉出钢后钢包内钢水温度预测模型
- Prediction of CAS end-point temperature of liquid steel by non-linear regression method 应用非线性回归技术预测CAS终点钢水温度
- 1.Such thermocouples were tried to recordcontinuously the temperature of liquid steel during smelting in anopen hearth furnace and a Bessemer converter, With encouragingresults. 这种热电偶曾在平炉和转炉中进行过钢水连续测温试验,结果出现了乐观的现象。
- temperature of liquid steel 钢水温度
- This paper analyzes the composition of liquid steel on the high - temperature mechanical property of steel and longitudinal surface crack of CSP slab. 从钢水成分影响钢的高温力学性能的角度,研究钢水成分对钢的高温力学性能和CSP薄板坯表面纵裂的影响。
- Always test temperature of liquid before feeding to baby. 总是试验温度的液体在给婴儿喂食。
- The results show that the model can effectively indentify two typical temperature patterns of sticking breakout and predict possible leakages of liquid steel. 结果表明,模型能够有效地识别连铸粘结漏钢过程中两种典型的温度模式和预报拉漏事故的发生。
- The results show that the model is effective in identifying two typical temperature patterns of sticking breakout and detecting possible leakages of liquid steel with the pr... 其结果表明;该模型对粘结漏钢过程中2种典型温度模式的预报率分别达到95.;6%25和97
- The dependence of the temperature of the clad, solidifying forefront on temperature of liquid Aluminum, temperature of steel plate and velocity of roll was predicted. 给出了铝液初始温度、钢板预热温度和轧制速度等参数与复合板温度、凝固前沿的关系；
- The argon-filling method does not influence degassing of liquid steel and is also applicable to VAR and EBR Processes. 该方法不影响钢中气体的去除,也同样适用于真空自耗重熔、真空电子轰击重熔等的冶炼过程。
- The temperature of volcanic gases is very high. 火山气体的温度很高。
- Except for the steel jets and its adjacent streams, most of liquid steel holds temperature at liquidus due to the existence of strong convection and turbulence diffusion in mold bath. 上旋涡流股由液面返回时的抽引作用是波动起伏的主要原因，波谷处的液面流速最大；
- It can directly measure the medium temperature of liquid ,gas ,steam etc.in various production processes. 它可以直接测量各种生产过程中的液体、气体、蒸汽等介质的温度。
- The results showed that the deoxidation product of Ti in liquid steel could become the nucleus of MnS in solidification of liquid steel. 结果表明：钛的脱氧产物都可成为硫化锰夹杂的形核核心；
- Argon bubbles distribute unevenly and the gas holdup of liquid steel in the upper region is far higher than that of the lower region. 氩气的分布不均匀;上回流区钢液的含气率大大高于下回流区.
- A pouring on of liquid, as in baptism. 注水如基督教行洗礼时的注水仪式
- Water freezes at the temperature of 0 degrees Celsius. 水在摄氏零度结冰。
- In this way we can improve the burnability and decrease the temperature of liquid formation, as well as the burning temperature. 用此方法，不仅可以改善生料的易烧性，并可降低液相出现温度和烧成温度。
