您要查找的是不是：
- Taper bore of tailstock barrel No. 尾座套筒锥孔锥度。
- It is very difficult to grind tapered bore in a large diameter gear without dedicated equipment. 由于没有专用设备,大直径齿轮锥孔磨削非常困难。
- Bearings with a tapered bore are always mounted with an interference fit. 带圆锥孔轴承始终以过盈配合安装。
- However, some bearings with a tapered bore 1:12 can be supplied (fig 18). 但是,一些轴承可提供锥度为1:12的圆锥孔设计(图18)。
- A few relatively wide bearings have inner rings with a tapered bore of 1:30. 少数相对较宽的轴承带锥度为1:30的内圈。
- Repair machining methods for the high precision taper bore with small machining allowance have been described. 介绍大齿轮高精度圆锥孔小余量进行修复的加工方法。
- Each roll needs to have a certain degree of manufacturing accuracy, principally roll of coaxality, runout, UN-roundness and roll a tapered bore taper. 每个版辊都必要有必定的创作发明精量，次要指版辊的同轴量、径向跳不静、不圆量以及版辊锥孔的锥量。
- For bearings having a tapered bore, inner rings are always mounted with an interference fit. 对于圆锥孔轴承,内圈的安装始终采用过盈配合。
- The bearings are generally mounted with an interference fit on the roll necks and therefore often have a tapered bore. 轴承一般以过盈配合安装在轧辊轴颈上,因此经常带锥形孔。
- The clearance limits are given in table 1 and correspond to ISO 5753:1991 for spherical roller bearings with tapered bore. 游隙限值在表1中给出,并符合ISO 5753:1991标准对带锥孔的球面滚子轴承的规定。
- Bearings with a tapered bore are used when an interference fit is required for the inner rings on the roll neck, e. G. When rolling speeds are high. 在轧辊轴颈上的内圈需要过盈配合时,例如轧钢速度高时,使用带锥形孔的轴承。
- Bearing with tapered bore, taper 1:12, intermediate ring between the outer rings and pressed steel cages (fig 14). 带有锥度为1:12的圆锥孔、外圈之间的中隔圈和钢板冲压保持架的轴承(图14)。
- Countershaft assembly uses tapered bearings to reduce end play and extend gear life. 中间轴组合使用锥形滚柱轴承以减少轴向间隙并延长齿轮使用寿命。
- Depending on bearing series the tapered bore has a taper of either 1:12 (designation suffix K) or 1:30 (designation suffix K30). 依据轴承系列,圆锥孔的锥度有1:12(型号后缀K)或1:30(型号后缀K30)。
- Bearing with two single row inner rings and one double row inner ring with tapered bore (taper 1:12 or 1:30) with roller and cage assemblies. 带两个单列内圈和一个双列内圈的轴承,内圈带锥形孔(锥度1:12或1:30)、滚子和保持架组件。
- Tapered bearing seatings are checked using ring gauges, special taper gauges or sine bars. 圆锥形轴承基座则采用环规、专用锥度规或正弦规检查。
- The structure, control principle and main part design features are introduced for precision rolling machine of the tapered bearing ring. 介绍了圆锥轴承套圈精密辗扩机的结构、控制原理及各主要组成部分的设计特点。
- The basic design self-aligning ball bearing is available with a cylindrical bore or, in certain size ranges, with a tapered bore (taper 1:12). 自调心球轴承的基本设计带有一圆柱孔,或者在某些尺寸范围内带一圆锥孔(圆锥1:12)。
- The actual clearance limits for bearings with a cylindrical bore are provided in table 1 and for bearings with a tapered bore in table 2 and are in accordance with ISO 5753:1991. 带圆柱孔的轴承实际游隙范围见表1,带圆锥孔的轴承实际游隙范围见表2,符合1991年的ISO 5753标准。
- Our torpedo boats bore down on the enemy cruiser. 我方面鱼雷艇向敌巡洋舰冲去。
