您要查找的是不是：
- Head dresser is secured high surface rough. 高精粗糙度修整装置。
- Table 1-2 Surface roughness and chrominance of treated wood. 表2处理材于水质环境下经长期试验后防腐剂之保留率.......57
- Surface roughness has a profound effect on wind speed. 地表粗糙度对风速有相当深刻的影响。
- A New Noncontact Method for Rapidly Measuring Surface Roughness[J]. 引用该论文 胡克平;李田泽.
- Sandblasting to achieve the desired surface roughness. 清洁辊筒表面，边缘倒角。
- The adding of POSS in the polymer lowered the surface roughness. 添加POSS后聚合物表面粗糙度减小。
- Variations in surface roughness of both guide and fiber surfaces have a marked effect on friction. 导纱器和纤维表面粗糙度的变动，对摩擦力都有显著影响。
- Effects of different preparation procedures on abutment surface roughness. 不同预备程序对基牙表面粗糙度的影响。
- Grainy edge Surface roughness on edges of web caused on the drying process. 起皱纸边纸卷边缘在乾燥过程所引致的起皱情况。
- Grainy edge: Surface roughness on edges of web caused on the drying process. 起皱纸边:纸卷边缘在干燥过程所引致的起皱情况。
- Surface roughness of the MSD MCrA1Y coating is far lower than the one of LPPS. MSD的MCrA1Y涂层表面粗糙度远比LPPSMCrA1Y低。
- Problems such as drill life exit burr and machined surface roughness etc. 对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究。
- Wood surface roughness was studied by using fractal dimension method. 应用分形维对木材表面粗糙度特征进行研究。
- Thirdly, microstrain-, peripherin-thick, surface roughness, resolution 3%. 不一是球磨砂纲，感平层不薄，暗地粗劣，分辨率3%25。
- The contribution of the guide surface roughness overshadows that of the fiber surface roughness. 导纱杆表面粗糙度的作用超过纤维表面的粗糙度。
- In this paper,the morphologies of lapped and polished granite surfaces were observed and the surface roughness and glossiness were measured. 对采用游离磨料研磨抛光后的花岗石表面粗糙度和光泽度进行了测量,并观察花岗石在研磨过程中表面形貌的变化。
- Roughness of the skin can be caused by bad diet. 饮食不好可能引起皮肤粗糙。
- Besides, the O/C ratios also changed and were different between the two side surfaces, and both side surface roughness decreased. 此结果显示聚酯薄膜两边表面的亲/疏水变化不一，主要是表面化学组成变化不同所致。
- For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers. 为了取得很好的粘结，粘结剂必须能克服表面粗糙和边界层的反应。
- Friction increases with increasing fiber surface roughness in the boundary and semiboundary. 在边界和半边界区内，摩擦随纤维表面粗糙度的增加而增加。
