您要查找的是不是：
- Hydraulic Loading System of Road Surface Friction Coefficient Test 道面摩擦系数测试液压加载系统
- Material Surface Friction Coefficient Measurements at Higher Pressure 高载荷条件下的材料表面摩擦因数测量
- Also ow coefficient of surface friction. 较小的表面摩擦系数。
- Influence of lubricant properties on surface friction coefficient of coated paper 润滑剂性质对涂布纸表面摩擦系数的影响
- Study on the surface frictional coefficient of Acrylate Emulsion 丙烯酸酯乳液膜表面摩擦因素的研究
- surface friction coefficient 表面摩擦系数
- Studies on the Calculation of Teeth Surface Friction Coefficients in Gear Drive 齿轮传动齿面摩擦因数计算方法的研究
- Low coefficient of surface friction, besides properties of general mod- ified polyes enameled round copper wire. 除具有普通的改性聚酯漆包线的特性外,还具有较小的表面摩擦系数的性能。
- The friction coefficient of the polish surface was 74% of that of grind surface. 摩擦表面抛光处理,使摩擦因数降低为磨削处理时的74%25。
- Laser cladding on titanium alloys can improve the surface properties, obtain the coatings with high hardness, good wear resistance and low friction coefficient. 在钛合金表面进行激光熔覆，可提高钛合金的表面性能，获得高硬度、耐磨性能好、低摩擦系数的熔覆层。
- The low density graphite gets higher friction coefficient and bulk worn loss than the high density graphite. 低密度石墨的摩擦系数和体积磨损量比高密度石墨材料高。
- The experimental results show that EDL has apparent effect on the friction coefficient and streaming potential. 结果表明,外加电场作用下,双电层电粘度效应对摩擦因数具有明显影响;
- The friction coefficient increases with the increase of amplitude, and decreases with the increase of load. 镀层摩擦因数随微动振幅增加而增加,随载荷的增加而减小;
- In superplastic forming, bulk metallic glass has larger surface friction resistance than ordinary metal alloys. 大块非晶合金在超塑性成形时呈现出比一般金属材料更大的摩擦阻力。
- Dry hair and oiliness hair had little difference on the average friction coefficient. 干性头发和油性头发的摩擦系数相差不大；
- The friction coefficient of sample with high porosity tended to reduce and stabilize in continuous braking cycles. 在连续循环制动时，高孔隙率材料的摩擦系数逐渐降低并趋于稳定。
- Their friction coefficients slightly increase with wear load up. 随着载荷的增加其摩擦系数略有增加;
- Superplasticity in a complex shape parts, the die surface of contact surface friction will limit further deformation region. 在复杂的超塑性零件的成形中，硬模表面的摩擦将限制接触面区域的进一步变形。
- Friction coefficient between coated dies and metal samples can be determined by compression tests of ring samples. 使用环形试样压缩试验,可测出涂层模具和相应金属试样间的摩擦因数。
- If lack of oil or oilway jam, wall panels inside voice will increase was mainly driven by increasing friction surface friction parts. 如果残油或油路畅通，墙板里背的不韵音不离会加不小，宾给是部件摩擦背的摩擦力加不小变成。
