您要查找的是不是：
- surface roughness microscope 表面光洁度显微镜
- The surface layer was characterized by means of scan electron microscope, electron probe, tensile testing machine and surface roughness instrument. 分别利用扫描电镜、电子探针、拉伸试验机、和表面粗糙度测量仪等分析技术对样品的组织结构、化学成分、和粗糙度等进行了分析。
- Head dresser is secured high surface rough. 高精粗糙度修整装置。
- Table 1-2 Surface roughness and chrominance of treated wood. 表2处理材于水质环境下经长期试验后防腐剂之保留率.......57
- Surface roughness has a profound effect on wind speed. 地表粗糙度对风速有相当深刻的影响。
- A New Noncontact Method for Rapidly Measuring Surface Roughness[J]. 引用该论文 胡克平;李田泽.
- Sandblasting to achieve the desired surface roughness. 清洁辊筒表面，边缘倒角。
- The adding of POSS in the polymer lowered the surface roughness. 添加POSS后聚合物表面粗糙度减小。
- Combining the shearing interference technique with microscope interference technique, we proposed a shearing microscope interferometry for the measurement of surface roughness profile. 摘要结合剪切干涉技术与显微干涉技术，提出了显微剪切干涉非接触表面粗糙度轮廓测量方法。
- Effects of different preparation procedures on abutment surface roughness. 不同预备程序对基牙表面粗糙度的影响。
- Grainy edge Surface roughness on edges of web caused on the drying process. 起皱纸边纸卷边缘在乾燥过程所引致的起皱情况。
- Grainy edge: Surface roughness on edges of web caused on the drying process. 起皱纸边:纸卷边缘在干燥过程所引致的起皱情况。
- Surface roughness of the MSD MCrA1Y coating is far lower than the one of LPPS. MSD的MCrA1Y涂层表面粗糙度远比LPPSMCrA1Y低。
- Problems such as drill life exit burr and machined surface roughness etc. 对采用超声波振动钻削微小孔时钻头的寿命、出口毛刺和加工表面粗糙度等问题进行了研究。
- Wood surface roughness was studied by using fractal dimension method. 应用分形维对木材表面粗糙度特征进行研究。
- Thirdly, microstrain-, peripherin-thick, surface roughness, resolution 3%. 不一是球磨砂纲，感平层不薄，暗地粗劣，分辨率3%25。
- The contribution of the guide surface roughness overshadows that of the fiber surface roughness. 导纱杆表面粗糙度的作用超过纤维表面的粗糙度。
- For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers. 为了取得很好的粘结，粘结剂必须能克服表面粗糙和边界层的反应。
- Friction increases with increasing fiber surface roughness in the boundary and semiboundary. 在边界和半边界区内，摩擦随纤维表面粗糙度的增加而增加。
- It can be customized with a customer demand, and consider surface roughness and polishing efficiency. 可随客户需求设计,兼顾加工时的面粗度及加工效率。
