您要查找的是不是：
- The mechanism of formation of surface residual stresses on structuralceramics upon grinding is studied. 对结构陶瓷磨削表面残余应力的产生机理进行了研究。
- Measuring ceramic grinding surface residual stresses by using both corrosion method and polishing method has been proved to be a better method than the X-ray diffraction method. 摘要用研磨抛光法与连续腐蚀法测试陶瓷磨削表面残余应力，与X射线衍射法相比较，具有经济、简便、测试精度高的优点。
- The surface residual stresses of tank track pins after being strengthened by means of rolling,shot peening or rolling plus shot peening were measured by X-ray stress measurer,respectively. 用X射线应力测量仪分别测定了坦克履带销经滚压、喷丸和滚压加喷丸三种表面强化后的表面残余应力。
- Investigation was made of effect of preplastic deformation for unexplosive and explosive treatments on strength, surface residual stress and hydrogen embrittlement of the specimens. 研究了预塑变对爆轰处理和未爆轰处理样品的强度、表面残留应力、氢脆敏感性及其关系的影响。
- Analysis of surface residual stress of strengthened tank track pins 坦克履带销表面强化残余应力分析
- Keywords surface strengthening;rolling;shot peening;surface residual stress; 表面强化;滚压;喷丸;表面残余应力;
- Research on the Method for Measuring Ceramic Surface Residual Stresses After Grinding 陶瓷磨削表面残余应力测试方法的研究
- Studying progress of the surface residual stresses after grinding for nanostructured ceramic coatings 纳米陶瓷涂层磨削表面残余应力的研究进展
- STRESS ANALYSIS ON ARBITRARY SECTION UNDER BOTH APPLIED AND SURFACE RESIDUAL STRESSES FOR CYLINDRICAL HELICAL COMPRESSION SPRING 外施应力与表面残余应力作用下圆柱螺旋压缩弹簧任意截面的受力分析
- A research on the effect of cutting force and surface residual stress of work piece on tooling wear 刀具磨损与切削力及工件表面残余应力的研究
- Influence of thermal deformation and deformation that surface residual stress has on axis part 表面残余应力对轴类零件热变形的影响
- Research on Surface Residual Stress in Turning Semi-spherical Part by Orthogonal Test Method 半球件车削残余应力的正交试验研究
- Considerable residual stresses exist in the normal direction. 在其厚度方向存在着可观的残余应力。
- surface residual stresses 表面残余应力
- The carbon in the media will diffuse in microstructure, which not only embrittles the tubes, but also produces the residual stresses on their surface. 当炉管长期在高温下工作时,介质中的碳会渗入到显微组织中,这不仅使材料脆化,而且使渗碳表面产生残余应力,导致炉管开裂。
- Residual stresses are present in the component before heat treatment. 热处理前部件中存在残余应力。
- The distribution of residual stress of weld joints is analyzed. 并分析了焊接接头残余应力的分布规律。
- Measurement of residual stress in multitrack laser-clad coating[J]. 引用该论文 胡木林;谢长生;黄开金.
- Residual stress is the main factor affecting the flatness of plate. 残余应力是影响矫后中厚板平直度的主要因素。
- In the girth-welded pipes, axial residual stresses in the weld vicinity are tensile on inner surface and compressive on outer sur... 计算值与实测值基本一致，表明有限元法能够有效地预测管道环焊缝接头的残余应力。
