您要查找的是不是：
- surface morphology of powder 粉末形貌
- The surface morphology of films were studied by scanning electron microscope. 最后，给出了复合膜的扫描电子显微镜图像结构。
- The UV-radiation behaviour of mechanical properties and surface morphology of poly (ethylene terephthalate) are studied. 摘要研究了紫外辐射对聚酯纤维的机械性能、表面形态结构的影响。
- The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope. 结果表明:与去离子水相比,在小牛血清润滑条件下ADZ陶瓷的摩擦因数和磨损率降低。
- The surface morphology of coatings and physic transformation were observed by SEM and DSC. 用氮气保护的管式炉进行纳米金刚石镍钴复合镀层的高温处理。
- Relations between energy consumption and particle sizes and morphology of powder and technological conditions have been determined by testing. 试验测定了机械合金化过程中能量消耗及粉末粒度、形态与工艺条件的关系。
- The amount of ATPU has an important effect on the structure and surface morphology of the composite particles. ATPU的用量也会对复合粒子的结构与形貌有较大的影响。
- The surface morphology of hollow microsphere is varies apparently different with reducing agents, ... 不同还原剂化学镀银微珠表面形貌明显不同,由此引起表面反射光谱的不同。
- ESCA has been used in the present study to characterize the surface morphology of SPU samples with different degree of phase segregation. 本文用电子能谱(ESCA)研究了两种链结构SPU的表面化学组成,其目的是了解表面组成与其本体结构及性能的关系,并将SPU表面组成与本体的相分离程度联系起来。
- Most synthetic detergents are in the form of powder or liquid. 大多数合成洗涤剂呈粉状或液态。
- However, for AISI 316, hydrogen barely changed the fracture surface morphology of notch specimen in comparison with that in air. 然而，对AISI 316而言，和在空气中测试的试片比较起来，氢气几乎没有改变凹槽试片的破断面形态。
- Static compress strength, impact toughness and thermal impact toughness as well as the surface morphology of the obtained diamonds were tested. 在间接加热腔体结构中，金刚石生长过程采用两种压力、功率梯度进行合成，合成后对所得的样品进行了静压强度、冲击强度、表面形貌检测。
- Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used to analyze component and surface morphology of the films. 用俄歇电子能谱(AES)、扫描电镜(SEM)和原子力显微镜(AFM)对薄膜的组成成分和表面形貌进行了分析。
- The effect of xanthate on the spinnability of the RSF solution was discussed, and the surface morphology of the RSF as-spun filament was observed by SEM. 讨论黄原酸盐对再生丝素纺丝溶液可纺性的影响，用扫描电镜对制得的再生丝素初生纤维的表面形态进行观察。
- Results of the determination of the surface properties showed that the resolution and the surface morphology of the modified IOLs were unaffected by modification processes. 分析结果显示,经碳、钛表面修饰的硅凝胶人工晶状体其分辨率和表面形态没有改变;
- The purpose of the thesis is to make the cathode for photovoltaic cell in order to raise the efficiency of water splitting by varying surface morphology of platinum thin film. 本研究目的为藉由界面活性剂添加改变白金薄膜表面型态作为光电水分解电池的阴极提升水产氢效率。
- The morphology of as-reduced powders, made by sodium reduction of potassium fluotantalate, is investigated.Modification of powder physical properties is also made and reported. 摘要用扫描电镜和透射电镜观察了氟钽酸钾钠还原生产的钽粉的形貌和内部微观结构，它是一种以团聚体为基本粒子的粉末。
- Results indicate that surface morphology of the nano composite electroformed deposits is different from that of purely electroformed Ni deposits,and the microhardness of nan... 纳米复合电铸层的强化机理主要是细晶强化机制、弥散强化机制和高密度位错强化机制。
- The surface morphology of carbon black(CB) particle and the nanomechanics of its aggregate are introduced and the nanorupture behavior of polymer/CB composite is reviewed. 介绍炭黑粒子的表面形貌及其聚集体的纳米力学属性,综述聚合物/炭黑复合材料的纳米断裂行为。
- The surface of powder core should be dealt with insulating coating. 磁粉心表面应进行绝缘涂覆处理。
