您要查找的是不是：
- TE surface waves in absorbing layers with high losses are studied. 研究TE表面波在高损耗吸收层中的特性。
- Describe the energy absorbing mechanism of composite metallic foams. 描述了复合泡沫金属材料的吸能机制。
- When the liquid layer is a low kinematic viscosity liquid, such as deionized water, the surface energy of the liquid layer strongly affects the adhesion characteristics. 当中间层为小粘度的液体如去离子水时，液体的表面能会对粘着特性有显著影响。
- Energy absorbing systems for use in klettersteig (via ferrata) climbing. 您当前的位置：搜库网首页 - Mountaineering equipment.
- The surface energy can be inferred from the observations fairly accurately. 表面自由能可以从观测中相当准确地推算出来。
- Energy absorbed per unit mass of the material. 单位质量物质吸收的电离辐射能量。
- Thomas J.Szabo,Judson Welcher.Dynamics of low Speed Crash Test with Energy Absorbing Bumpers[J].SAE,921573. 王晓.;汽车碰撞吸能元件的理论与试验研究[D]
- A shaking table test is done to study the effect of shock absorbing layer of the portal part of tunnel in strong ground motion zone. 为了研究强震区隧道洞口段设置减震层的减震效果,对隧道结构进行了振动台模型试验。
- The surface energy of mica cleaved in vacuum is about ten times that of mica cleaved in air. 在真空中剖开的云母的表面能比在空气中剖开的云母的表面能大十倍左右。
- Flexo plate with plate (also known as digital flexo) peripherin-layer coating on the top of a layer of black UV absorbing layer, the layer is also sensitive to infrared. 激光烧蚀后，即可对印版进行曝光，保留在印版空白处的黑色涂层挡住光线，而图文处的感光胶层由于失去了黑色图层的保护，发生光聚合反应，即形成印刷网点。
- Based on high viscous asphalt, this paper mainly studied the following four topics: Firstly, FEM (finite element method) was used to analyze the effect of stress absorbing layer. 本文以高粘性沥青为结合料,主要对以下四方面内容进行了研究:首先,用有限元方法计算分析应力吸收层防治反射裂缝效果。
- Interannual and Seasonal Variability of the Surface Energy Balance and Temperature of Central Great Slave Lake. 湖中部表面能量平衡和温度的年际和季节变率。
- One effective solution to this conflict is to use a resonant cavity enhanced (RCE) photodetector.In the RCE photodetector, the absorbing layer is put inside a Fabry-Perot cavity. 谐振腔增强型(RCE)光探测器为这一矛盾的解决提供了有效的方案。
- Floc properties may be described by properties as floc strength, specific surface area, surface potential and surface energy. 絮凝物可以通过絮凝物强度,具体表面,表面潜力和表面能量来描述。
- With outstanding ductility and energy absorbing properties, combined with good strength and castability. (AM60B have comparatively higher tensile strength) E.g. 除高强度及铸造性能外，更有卓越的延展性及能量吸收特性.
- When the surface energy of the sample is relatively even, the DFT method is a good choice. 表征材料表面能量均匀的样品可首先考虑采用DFT法；
- Optimizes the solar energy absorbed by the collector. 优化集热板的太阳能吸收。
- This film also can be used on some low surface energy materials (such as Formica) commonly used in air showers. 此膜也可用于任何表面张力比较低的介质（如福美加板）区域，尤其适用于空气喷淋室的墙面。
- The surface energy of DLC films is dependent on the carbon bonds and surface roughness. DLC薄膜表面能高低取决于表面碳碳键与粗糙度的变化.
- The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues and coatings. 在低表面能的聚合物为基础的基板往往导致贫困的粘附油墨，胶水和涂料。
