您要查找的是不是：
- Design and Operation of Superheat Temperature Control System Concerning Superheat Wall Temperature 考虑壁温控制的过热汽温自动控制系统设计与投运
- superheater wall temperature 过热器壁温
- Tells FDS to record the wall temperature of all solid surfaces. &BNDF QUANTITY='WALL_TEMPERATURE' / 告诉FDS 记录全部固体表面的墙温度。
- Stainless steel single and double wall temperature control containers. 不锈钢容器及带温控夹套砂磨筒。
- The infrared radiation and wall temperature were obviously decreased by cooling. 通过冷却，各喷管的壁温和红外辐射强度明显降低。
- The amplitude of wall temperature fluctuation is larger than that of fluid temperature oscillation. 流量的波动又引起了管壁温度和流体温度的周期性波动；
- From the curves of wall temperature vs axial length , the location of dryout points were obtained. 由壁温随长度的变化曲线得到干涸点产生的位置。
- The wall temperature,collapsed liquid level and liquid carryover transient are measured. 试验表明,再淹没过程中,定位格架下游的元件表面温度明显下降,骤冷前,定位格架下游的传热系数比上游高,特定工况下,可高出70%25,定位格架对传热的影响程度随试验参数及距骤冷前沿位置的不同而不同;
- The wall temperature distribution is tested on an annular combustor by using thermocouple and temperature-indicating paint. 壁温分布试验在全环形燃烧室试验台上进行，采用热电偶和示温漆测量。
- The heat losses and wall temperature under steady heat conduction of Fiber linings in enamelling furnace are calculated and analysed. 分析计算了在稳态导热情况下搪烧炉纤维炉衬不同结构时的散热量和外壁温度,给出了炉衬经济厚度的计算公式和计算方法。
- The wall temperature distributionin different impinging jet heigtht are given,as well as sensitivity and accuracy of the technology arediscussed. 文中给出了在不同射流高度下壁面温度分布的等值线，并讨论了液晶测温技术的灵敏度及测试精度。
- The wall temperature of combustion section for an afterburner is significantly related to the safety of an aircraft and aeroengine. 加力燃烧室燃烧段的壁温对飞机和发动机的安全关系重大,单靠数值计算是很不够的,目前主要靠测试取得。
- By use of implicit scheme,exit and wall temperature varying with time in air-precooled heat exchanger for compound engine are extracted. 利用隐式格式,求得组合发动机空气预冷换热器随时间而变的出口及壁面温度。
- In addition, the wall temperature in the adiabatic section fluctuates regularly and periodically under the steady working conditions. 振荡热管稳定运行时，绝热段各管管壁温度波动是有规律、周期性的。
- Numerical analysis on convection heat transfer of laminar pulsating flow in a circular tube with constant heat flux and constant wall temperature is investigated. 对等热流和等壁温边界条件下圆管内层流脉冲流动对流换热问题进行了数值模拟。
- The shutters thumped the wall in the wind. 在风中百叶窗砰砰地碰在墙上。
- The paper analyzes the reasons of vapor lock of light oil swing arm for rall tanker from oil property, oil temperature, technological flows and the wall temperature of swing arm. 从油品性质、油品温度、工艺流程和鹤管壁温等因素,剖析了铁路油罐车轻油鹤管发生气阻的原因。
- We use optimized digital filter and high accuracy transform circuits to precisely measure the external wall temperature of the autoclave and the air temperature in it. 为保证釜体外壁温度和炉膛空气温度的测量精度，采用了优化数字滤波及精度转换电路。
- The experimental results show that, the air/fuel ratio, inlet air temperature and vaporizer wall temperature are major influential factor to vaporization rate. 试验结果表明，气油比、蒸发管人口空气温度和蒸发管壁温是影响蒸发率的主要因素。
- With mathematical simulating method,the design method for hydrogen chloride synthesizer annexed with wall temperature restriction condition is put forward. 采用数学模拟法提出了附加壁温约束条件的氯化氢合成炉系统设计方法。
