您要查找的是不是：
- suction valve lifter 吸入阀片提举器
- The suction valve of NO.3 liner is seized. 3号缸的上水凡尔卡死了。
- The valve lifter, a round cylinder, rides on the cam. 气门挺杆为一圆筒体，坐落在凸轮上。
- Confirm line up, tank outlet and pump suction valve keep free open. 确认流程已通，罐出口及泵入口的阀门保持全开。
- VTi stands for “Variable valve lift and Timing Injection”. 积分是“可变阀门升程和定时注射".
- The value-opening mechanism includes a valve lifter and a cam on a camshaft. 一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
- The lobe on the cam controlling the intake valve has moved out from under the valve lifter. 控制进气阀的凸轮上的凸角在阀挺柱向下回转。
- Since scroll compressor has neither suction valve nor clearance, its volumetric efficiency is 90-98%,while that of reciprocating compressors is only 65-75%. 没有吸气阀，没有余隙容积容积效率可以达到90%25-98%25，而多缸活塞式压缩机容积效率只有65%25-75
- The cam has a high point, or lobe; every time the cam rotates, the lobe comes around under the valve lifter and move it upward. 凸轮有一个最高点,即凸角,每一次,凸轮旋转,凸角旋转到挺杆的下部,使其向上移动。
- On most engines, this mechanism, called the valve train, includes a cam on the camshaft, a valve lifter, a push rod, and a rocker arm. 在大多数发动机中,这套装置叫做气门机构。这套装置中包括凸轮轴上的一个凸轮、一个气门挺杆、一个气门推杆和一个摇臂。
- Abstract ：In this paper, the in-cylinder flow characteristics under variable valve lift (VVL) were studied in a single-cylinder four-valve optical SI engine. 摘要 ：在一台四气门可视化光学发动机上，研究了可变气门升程下缸内气体流动特性。
- All detachable parts (eg, hoods and suction valves) should be removed and soaked in a detergent solution. 所有可拆下的部分（罩子和吸引阀门等）应当拆下并浸泡于洗涤溶液中。
- When ready to start centrifugal pumps, fully open suction valves and throttle discharge valves of a positive displacement. 当准备好启动离心式泵时，吸入阀全开，容积式排出阀节流。（关于装置开车）
- The process uses less fuel and more air to generate power by using advanced technologies, direct injection, electric cam phasing, variable valve lift and cylinder pressure sensing. 该过程使用的燃料和更多的空气来发电用先进的技术，直接喷射，电子凸轮分阶段，可变阀门升程以及缸内压力传感.
- To measure the concerned parameter at production line, a highly automatic steady-state test bench based on the old version is presented in this paper, on which the valve lift and test pressure are all computer-controlled. 本文在原气道试验台基础上，设计了一套自动化程度较高的气道稳态试验台，可以对气门升程和试验压力进行自动调节，适用于生产线上使用。
- Bronze suction valve for seaward sluice GB/T2030-1980青铜吸入通海阀
- engine-room emergency bilge suction valve 机舱应急舱底水吸入阀
- Cast steel suction valve for seaward sluice GB/T2029-1980铸钢吸入通海阀
- suction valve bolt and split pin 吸入阀螺栓及开尾销
- Some pumps and all vacuum cleaners work by suction. 有些泵和所有真空吸尘器都是借吸力工作的。
