您要查找的是不是：
- Stress Strain Analysis of Ore Yard Foundation Improved by Loading Pre-compaction and Mixing Piles 堆载预压加搅拌桩方案加固矿石堆场地基的应力应变分析
- Design & construction and stress strain analysis by FEM for Tangfangmiao Rockfill Dam with composite geomembrane core 塘房庙复合土工膜心墙堆石坝的设计、施工和应力应变有限元分析
- stress strain analysis 应力应变分析
- The grid method of strain analysis is one of the oldest techniques known to experimental stress analysis. 格栅法是实验应力分析中最古老的技术之一。
- The earthquake spectrums analysis indicated that the failures of building structural steels at seismic areas are created of high stress strain and low cycle fatigue. 地震波谱分析表明,地震区建筑结构用钢受震时的主要失效形式是高应力低周疲劳损伤和断裂。
- It is the basis to determine the roller diameter position and strain analysis. 它是确定轧辊滚动直径位置和张力分析的基础。
- The damage parameter versus fatigue life figures, which were plotted based on the stress?strain analysis and test results, could be used to predict the fatigue lives of the composite with different winding angles. 根据双轴载荷条件下管状试样的应力-应变分析及双轴疲劳实验结果;绘制出了基于临界平面的多轴损伤参量与疲劳寿命关系图;可对不同缠绕角的复合材料疲劳寿命进行预测.
- Meanwhile, the whisker orientation affects the shapes of the stress strain curves of the composites. 同时晶须取向也影响复合材料的热压缩应力-应变曲线的形状。
- An important aspect of the stress strain data in Fig. 78 is the linearity of the log-log plots. 图78中应力-应变数据的一个重要情况是在双对数座标上图线的直线性。
- Goodwin G M Application of Strain analysis on sheet metal forming problems in the press shop[SAE Paper,No.680093. 戴昆.;何祝斌
- The formulate of stress、strain and BEF have been deduced and all these have been testified by experiment. 通过实验，证明了这些公式的正确。
- The diffuse necking and localized necking in the tensile testing of sheet is proved through reseau strain analysis. 通过拉伸过程应变网格分析，验证了薄板拉伸分散性失稳和集中性失稳的存在。
- The results show that the method can be applied to strength behaviors and stress strain characteristics of plastic foamed beads light soil. 结果表明：该方法可以比较合理地对塑料发泡颗粒轻质土的应力-应变特征及强度特性进行评价；
- FLD is usually measured with swell test in rigid die.The tested FLD is good fit that one measured by analogue computer in ASAME(Automated Strain Analysis and Measure Environment). 成形极限图通常是通过钢模胀形试验测得,实际测量的成形极限图与ASAME自动应变测试分析系统模拟计算的成形极限曲线吻合较好。
- This thesis mainly researches whole performance of high-rise building disposed SRC column and partial stress、strain of SRC column,it belongs to the field of RC. 本文主要研究配置型钢混凝土柱的高层结构的整体工作性能和型钢混凝土柱的局部应力应变情况，属钢筋混凝土课题。
- Analysis of Stress %26 Strain near the Crack Tip 裂纹尖端附近区域的应力应变场分析
- The maximum deformation place and degree of safety strain of Cherokee panel -- cowl air chamber arefound by the grid strain analysis combined with the foming limit curve(FLC) of a plate. 通过网格应变分析，结合钢板成形极限曲线FLC，找出切诺基前围空气室板的最大变形部位，应变安全裕度。
- Stress can be the undoing of so many fine players. 紧张可能是这许多优秀选手失败的原因。
- According to geologic mapping and strain analysis, the regional S-N tectonics only developed in Pre-Ordovician areas, and the northeast of Tesibahan Faults formed before Hercynian orogeny. 通过地质填图综合调查和应变分析研究，区域性的南-北向构造仅发育于前奥陶系分布区，特斯巴汗断裂北东，是海西运动前的产物。
- By plasticity increment theory,the stress strain numerical calculate methods of bellows bulge forming, solvers theory calculating problems of bellows bulge forming technology are put forward. 采用塑性增量理论，建立了波纹管液压胀形的应力、应变数值计算方法，解决了波纹管液压胀形工艺的理论计算问题。
