您要查找的是不是：
- Objective To investigate the displacements and the stress distributions of a mandibular second molar. 目的了解下颌第二恒磨牙不同载荷下近中移动时的位移及应力分布情况。
- Analysis shows that the stress distributions of main girder are reasonable when the inclined web thickness is around 30 cm. 分析表明:斜腹板厚度为30 cm左右时,主梁的应力分布比较合理。
- A computer software package called I-DEAS is used to simulate the spreader to analyze the stress distributions and nature frequencies of the spreader. 此外，并利用I-DEAS套装软体来建立撒布机之电脑模式，并找出其应力分布与自然频率，此频率均远高于直流马达之最大旋转频率。
- An axisymmetrical boundary element method is used for the fiber pull-out test model to obtain the stress distributions at the fiber-matrix interface. 本文利用边界元方法对单纤维拔出实验模型进行了计算分析,得到了奇异的应力结果。
- It shows that, the weldbonding structure is preferable to the actual using spot weld one, either in strength op in stress distributions. 结论是应用粘接点焊新技术的结构在结构强度特别是在应力分布上比点焊结构明显优越。
- Abstract: Temperature and thermal stress distributions in the KDP, heated by repetition frequency laser, are given by means of finite element methods. 摘 要： 基于有限元数值方法，给出电光晶体KDP在高平均功率激光负载下温度场分布和应力场分布。
- The strengthening mechanism of fiber is reasonably analyzed with the comparison of interface stress distributions and failure curves. 通过两种工况下界面应力分布情况和失效曲线的比较,分析了纤维的增强机理。
- Stress distributions on upper chords and deck plates, mechanism of load transferring between the plates and trusses and joint function of both of them are analyzed. 通过芜湖长江大桥斜拉桥整体模型试验，研究了板桁组合结构斜拉桥施工阶段的动静力特性，分析了上弦杆与桥面板应力分布、板桁之间传力机理及板桁共同工作特点。
- Objective The aim of this study was to assess the effects of varying retractive force directions on the displacement of and stress distributions in palate. 摘要目的探讨后牵引矫形力的方向与上颌腭部位移和应力分布的关系。
- The FSW process results in different microstructures and stress distributions at different weld zones, which exhibit different corrosion behaviors correspondingly. 其工艺特性导致各焊缝微区组织和应力状况不同，从而展现出不同的腐蚀行为。
- Moreover, the 3D stress distribution is more undulant than the 2D one. 相对而言，三维的应力分布曲线起伏较大。
- Stress can be the undoing of so many fine players. 紧张可能是这许多优秀选手失败的原因。
- This method depends on determining the change in stress distribution within the model when it is turned upside down. 倒置法的依据是在模型倒置时测定模型内应力分布的变化。
- Obiective:To study the stress distributions of modified b ar-clip implant-borne overdenture in the edentulous mandible under vertical lo ads on the bar and on the artificial teeth. 目的:分析全下颌改良杆卡式种植覆盖义齿种植体固位杆上加载义齿人工牙上加载的应力分布。
- The temperature and thermal stress distributions in the front end photo shutter of Shanghai Synchrotron Radiation Facility (SSRF) were simulated carefully by the finite element package ANSYS. 利用有限元分析软件ANSYS，对上海同步辐射装置(SSRF)前端光子档光器，进行了精细的温度和热应力分析。
- Abstract: The strain and stress distributions of pure Ti during equal channel angular pressing (ECAP) were simulated by using software of DEFORM-3D with different angular radii and black pressures. 摘 要: 使用DEFORM-3D软件模拟等通道转角挤压过程中外转角半径及背压对纯钛应力和应变分布的影响，探讨不同 R值对材料流动的影响规律。
- The effect on the stress distribution will be negligible except in the immediate vicinity of such points. 除了紧靠荷载作用点的区域以外，上述影响均可以忽略不计。
- We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces. 我们定义了承受平面力的薄板平面应力分布条件。
- In the word "mother" the stress is on the first syllable. 在"mother"这一字里，重音在第一个音节上。,在＂mother＂这一字里，重音在第一个音节上。
- Stress distribution is determined in a thin conductive plate containing an elliptic hole under the external electromagnetic loads. 摘要给出一种针对含椭圆孔的导电薄板在电磁力作用下的分析方法。
