您要查找的是不是：
- The Fracture Process Simulation and Fracture Strength of Gear Tooth in Mining Machine 采掘机械齿轮轮齿断裂过程仿真与断裂强度
- strength of gear teeth 齿轮强度
- Exact modeling of gear teeth is based on meshing theory. 摘要根据齿轮啮合原理，建立了轮齿的精确齿形。
- By strengthening under low amplitude loading,bend fatigue strength and life of gear teeth can be increased by 3.97 and 109 percents,respectively. 经过低幅载荷强化;该齿轮轮齿的弯曲疲劳强度提高了3.;97%25;弯曲疲劳寿命提高了109%25。
- This paper analyzes gear failure resulted by damage of teeth surface and puts forward some methods improving touch strength of gear. 对齿轮齿面损坏造成的齿轮失效进行了分析,并提出了一些提高齿轮接触强度的方法。
- Of gear foot and contact fatigue strength of gear profile. 齿根弯曲疲劳强度,齿面接触疲劳强度。
- The engagement of gear teeth. 啮合齿轮的互相咬合
- Based on the above technologies, the CNC system for the generation motion of gear teeth profiles is developed and used on the CNC reconstruction of Y38A hobbing machine. 开发了功能齿廓曲面展成运动的全闭环数控电轴传动链和同步控制系统,并成功用于Y38A型滚齿机的数控化改造。
- Chamfering process of gear tooth profile and its function are introduced. By tooth profile chamfer, noise of gear transmission can be reduced. 通过对齿轮传动噪声产生原因的分析,介绍运用齿轮倒棱工艺,降低噪声的工艺方法及应用。
- Contact fatigue strength of marine gear tooth face 船用齿轮齿面接触疲劳强度的研究
- My whole morning's work has been put out of gear by that mishap. 我一个上午的工作全让这倒霉的事给弄得乱了套。
- Wilcox, L. and Coleman, W.: “Application of Finite Elements to the Analysis of Gear Tooth Stresses”, The American Society of Mechanical Engineers, pp.1-12, 1972. 高则同译:齿轮手册（设计制造应用）下册;(台北);台北市徐氏基金会;1978-7.
- The modifications of gear tooth profiles like tooth thickness, tooth tip and edge chamfers and root fillet radius are easily manipulated in a editing window. 如齿厚，齿尖和边缘倒角及根圆角半径齿轮齿廓的修改很容易操纵的编辑窗口。
- The long war of attrition exhausted the strength of both countries. 这场长期的消耗战耗尽了两国的力量。
- Using Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass rods of 5 mm diameter, fine spur gear with boss (pitch diameter 6 mm, number of gear teeth 24, modulus 0.25 mm) is fabricated with super-plastic die-forging method under vacuum condition. 以直径为5 mm的zr41.;25Ti13
- I also learned the strength of the collective. 我还认识到了集体的力量。
- In this paper, using Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass rods of 5 mm diameter, fine spur gear with boss (pitch diameter 6 mm, number of gear teeth 24, modulus 0.25 mm) is fabricated with super-plastic die-forging method. 本文以直径为5 mm的Zr41.;25
- According to Hertzian stress, the stiffness during the contact of a pair of gear teeth is derived, and the variation of stiffness is introduced into the rack-and-pinion meshing model. 以赫兹应力推导齿对啮合刚度，并将刚度变化加入齿条-齿轮啮合模式中；
- I did it on the strength of his promise. 我是因为有了他的承诺才做这件事的。
- My watch got out of gear and would not run. 我的表出毛病了，它不走了。
