您要查找的是不是：
- The accuracy of adjusting parameters of torpedo fuel flow regulator is an important factor which determines whether a power test of torpedo power unit succeed or not. 鱼雷燃料流量调节器调试参数的准确性是决定动力装置功率试验成败的重要因素。
- Fuel Flow Regulator 燃油流量调节器
- The control unit regulates the fuel flow to the combustion chamber, during starting and normal operation. 控制组件用来在起动及正常操作期间调节流进燃烧室的燃油量。
- Plug the flow regulator into the wall and attach the nebulizer. 将气流调节器插头接通墙上电源，并连接喷雾器。
- Plug the flow regulator into the wall and attach the nebulizer . 将气流调节器插头接通墙上电源，并连接喷雾器。
- The fuel flow from the accelerator pump is split between the two barrels. 从加速油系统流出的燃料在这二腔之间分开。
- The compressed air system for operation of the starting fuel limier and the electropneumatic overspeed trip have their own connections to the external starting air system. 用以运行启动燃料的压缩空气系统，有其自有的与外部启动空气系统的连接点。
- Fuel flow indicator of No3 engine out of operation (fluctuating) but we found No3 engine working normally. 第三发燃油油量失效（摆动），但发动机工作正常。
- A fuel-flow transmitter measures the rate of fuel flow from the MEC and provide a signal to the fuel flow indicator. 燃油流量传感器从主发动机控制器测量燃油流率并为燃油流量指示器提供信号。
- The solenoid valve allows fuel flow to the combustion chamber after the initial rotation of the APU. 电磁开关允许燃油当APU初始转动后流向燃烧室。
- The compressed air system for operation of the starting fuel limier and the electropneumatic control valve overspeed trip have their own connections to the external starting air system. 用以运行启动燃料的压缩空气系统，有其自有的与外部启动空气系统的连接点。
- EMC MW93 Weight Change Instrumentation is used to control the flowrate of material passing through a weigh hopper and flow regulator (e.g. augers or rotary valves). 变重秤系统用于控制经过称重料斗及流量调节器的物料流量，此类系统常用的流量调节器为螺旋输送机或旋转阀。
- A long hollow tube attached to a tanker aircraft, through which fuel flows to another aircraft being refueled in flight. 空中加油导管连结在飞机油箱上长的套空管，油料通过它流向空中被加油的飞机
- An EMC MW93 Weight Change Instrumentation is used to control the flowrate of material passing through a weigh hopper and flow regulator (e.g. augers or rotary valves). 变重秤系统用于控制经过称重料斗及流量调节器的物料流量，此类系统常用的流量调节器为螺旋输送机或旋转阀。
- The model inputs include the fuel flow, the nozzle area, the altitude and Mach number, and model outputs include the rotor speed, the temperature and the air pressure. 模型的输入量包括燃油流量、喷口面积、高度及马赫数，输出量则包括高、低压转子的转速及各截面的温度和压力。
- When a load is applied to the APU, the fuel control unit meters the fuel flow to maintain a near constant speed and a safe operating temperature of the unit. 当一个负载被加到APU上时，燃油控制组件测量燃油量以保持一个相近的恒定速度及组件的安全温度。
- Balz is used in fuel flow convection hea transfer.The normal four-power formula is used in radiation heat transfer.Film-cooling is used in near-wall treatment. 冷却液侧对流换热采用米海耶 夫单相紊流强迫对流换热公式，燃气侧对流换热采用巴尔兹公式，辐 射换热采用常规的四次方公式。
- Inspection of Cold Starting Fuel Injector on-line 冷起动喷油器的就车检查
- The fuzzy-PID control used in temperature control, with temperature departures and the changes and as its input and fuel flow as output, could satisfy the control demand. 对温度用模糊PID控制,以温度偏差和温度偏差变化为输入,燃料流量为输出,这个模糊控制器能满足控制要求。
- The operating principle of foci flow regulator was mainly analyzed to establish a static and acceleration/deceleration control mathematical model, and then analyze the high-altitude adaptability. 针对以往对原发动机燃油调节器部分所作的分析较少，使得改型工作缺乏必要的理论支待问题。
