您要查找的是不是：
- solid volume rate 固体体积率
- A Fitting Formula for Solid Volume. 棱台体积。
- The sulfonation degree of products would be higher as the volume rate of 1,2-dichloroethane and cyclohexane was 8. 反应溶剂中，DCE与环己烷的体积之比为8: 1左右时，磺化度达到最高；
- The slurry apparent viscosity has exponent relation to the solid volume content. 矿浆表观粘度与固体体积含量呈指数关系。
- Hexagon is to be calm, sensible, solid volume and a sense of honesty and credibility symbol enterprises, it says. 以正六边形的镇静、理智、稳固和体积感，象征企业诚实可信，良性发展。
- Laser cladding of Stellite+WC with WC volume rate of 0%, 9%, 18%, 27%, 36%, 45%, 54%, 72%, and 100% was investigated by dual powder feeding. 研究了用双筒送粉器分别输送Stellite 6和WC ,WC体积含量分别为 0%25 ,9%25 ,18%25 ,2 7%25 ,36%25 ,45%25 ,5 4%25 ,72%25和 10 0%25的高功率CO2 激光熔覆特性及其演变。
- The latter one was responsible for a change in solid volume fraction when the material passes the discon... 为在实际触变塑性成形工艺分析中的进一步应用奠定了理论基础。
- Found that there is Coupling affection of TGS and PVDF in composite.The coupling affection is evident that the volume rate is about 1:1. 发现复合膜中TGS与PVDF的耦合对复合膜的传导性和热电驰豫有影响,体积比约1:1时影响较显著。
- The effects of carbonous density and solid volume loading on the microstructures, and the performance of the new method were investigated. 通过对焊缝金相显微结构的分析,结合计算机图形处理软件计算出焊缝的烧结密度。
- A continuous equation, three momentum equations are set up for each phase, and the algebraic equation with sum of volume rate amount to one is set up in this model. 该模型针对每一相都建立了一个连续性方程、三个动量方程，并建立了一个体积率和等于1的代数方程。
- The effects on performance of SMB process by such factors as feed volume rate,ratio of extract and raffinate,switch time and desorbent volume rate were studied. 考察了进料液流量、提余液与提取液的流量比、切换时间和洗脱剂回流比等操作条件对SMB分离性能的影响。
- It is suggested that the pH=10 and adjusted before the mixture FeO(OH) colloid to the MBF solution,and the volume rate was 1 5. The removal of direct yellow dye reached 98 7%. 上清液与水合氧化铁溶胶投量比为 1 5 ; pH值的调节在FeO(OH)溶胶加入之前 ,直接黄染料 (DY4 )的最高脱色率达 98 7%25。
- Inspired by some Chinese traditional painting, in which the "solid volume" of stones and mountains were represented by contour lines. The material will be Formica's surell series. 从中国古画得来的灵感，以线描的语言代替实体描绘。材料将是富美家的色丽石系列。
- For calculating the cost of the cavity/core, the dissertation brought forward the concept of volume rate for roughing, and the concept of surface rate for finishing, which embodied the real manufacturing of the mold. 在型芯/型腔加工成本的估算上也提出了体积加工率和面积加工率的概念,体积加工率计算粗加工工时,面积加工率确定精加工工时,体现了型芯/型腔的加工过程,计算结果具有较强的可信度。
- The effects of carbonous density、solid volume loading and silicon carbide particle size distribution on the microstructures and mechanical properties of the welding seams were investigated. 探讨了糊料的碳密度、固相体积含量以及碳化硅颗粒级配对焊缝显微结构和机械性能的影响。
- Liquid paints characterisation - solids volume, density, solids weight, pigment content, binder or solvent content. 液体涂料的特性-固体体积、密度、固体重量、颜料含量、粘合剂或溶剂含量。
- volume rate of flow of a compressor 排气量
- The physical volume or bulk of a solid body. 体积物质体积或一件固体的体积
- Cheese is a solid; milk is a liquid. 乾酪是固体，奶是液体。
- Economic Analysis of the Best Use of Building Volume Rate 容积率最佳使用的经济学分析
