您要查找的是不是：
- Its subject coverage includes: sol gel coatings. 它的主题涉及的范围包括：螺线管胶凝体涂层。
- Pure and Pt doped ( m( Pt ):m( WO 3)=0.3%) WO 3 thin films were prepared using the sol gel process by the dip coating technique on alumina substrates. 用溶胶凝胶浸渍技术在三氧化二铝基片上制备了纯和 (m(Pt) :m(WO3 ) =0 .;3%25 )铂搀杂的三氧化钨膜
- The preparation of WO 3 thin films has been reported using a sol gel process together with the dip coating method, and tungsten powder being the raw material. 以金属 W粉为无机原料 ,溶胶 -凝胶技术结合浸渍镀膜方法制备出 WO3 薄膜 ,借助 SEM、可见光分光光度计、椭偏仪等仪器测量了薄膜的特性。
- Homogeneous and transparent thin nanostructured titania films doped by Y3+were prepared on glass substrates by sol gel processing and dip coating technique. 用溶胶-凝胶法和浸渍-提拉法工艺,在玻璃表面上制备了均匀、透明的钇离子(Y3+)掺杂二氧化钛纳米薄膜。
- BST thin films sol gel technique epitaxial growth electrical properties. 标 签 薄膜 溶胶-凝胶工艺 外延生长 电性能.
- The spin coating is followed by a baking step to remove the solvent and, in some cases, to complete the polymerization. 接著以烘烤除去溶剂，有时候可以顺便完成聚合反应。
- TiO_2 nano thin film was prepared on ITO glass substrate by dip coating and spin coating process. 以TiCl_4和C_(16)H_(36)O_4Ti溶胶为前驱体,分别采用旋转-涂覆法和浸渍-提拉法制备了纳米TiO_2薄膜。
- This paper systemically introduced the features, principle, technological process and the application of coating materials, prepared by sol gel process, looked ahead the coming developing prospect. 较系统地介绍了溶胶凝胶法制备涂层材料技术的特点及一般原理。概述了溶胶凝胶法制备涂层的工艺过程以及涂层材料的应用。展望了未来的发展前景。
- Gel Spinning of Gelatin Aqueous Solutions Including Fish Gelatin. 鱼明胶等湿法凝胶纺丝。
- We prepared two kinds of OLED devices by spin coating, which have three-layer structures[a:ITO/MEH-PPV/Al] and [b: ITO/MEH-PPV/Ca:Al]. 我们利用MEH-PPV为发光材料制备了两种结构电致发光器件:a.;ITO/MEH-PPV/Al和b
- The chemical is widely used in the production of LSI,VLSI and other semiconductors to remove photoresist edge bead that occurs during typical spin coat wafer processing. 该试剂用于清除匀胶后残留于硅片边缘及背面的光刻胶，已经广泛应用于中、大规模集成电路及其它半导体器件的生产。
- C.J.Brinker, W.Scherer, Sol Gel Science The Physics and Chemistry of Sol Gel Processing (San Diego, 1990). 郑舜宇,“以溶胶-凝胶法合成高分子基氧化矽复合材料之研究”,国立中山大学材料科学研究所硕士论文,民国90年。
- The ultra fine WO 3 powder was prepared by colloidal chemistry method, sol gel and polymerized complex method. 通过胶溶法、溶胶凝胶法、聚合络合法合成了超细三氧化钨粉体。
- The TiO_2 nano thin film prepared by spin coating process is white, while the TiO_2 nano thin film made by dip coating process is colorless and transparent. 以TICl_4为通过旋转.;涂覆法制备的纳米TiO_2薄膜;表观为白色不透明膜;而以C_(16)H_(36)O_4Ti为前驱体选用浸渍-提拉法制备的薄膜为无色透明膜。
- ZnO film got by spin coating as the electron transport layer, MEH-PPV as the hole transport layer, a new structure of electroluminescence device was fabricated. 并且对此结构的双层器件进行了不同颗粒尺寸的ZnO纳米颗粒薄膜的对比研究。;
- Sol gel hepatitis B surface antibody (HBsAb)/Au unmarked immunosensor is presented for the detection of hepatitis B surface antigen (HBsAg). 采用溶胶 凝胶 (sol gel)技术包埋乙肝表面抗体 (HBsAb) ,涂布于金盘电极表面 ,构成sol gel HBsAb/Au非标记免疫传感器 ,用于检测人血清中乙肝表面抗原 (HBsAg)。
- The sol gel technique and dip withdrawal method have been employed to produce amorphous CuO SiO 2 thin film with high porosity. 利用溶胶凝胶工艺和浸渍提拉法制备了非晶态CuOSiO2多孔薄膜湿敏元件;研究了它们的感湿特性.
- The ferrite ultrafine particle catalysts which contain Zn,Ni and Co were prepared by sol gel method and characterized by DTA TG,IR,XRD and BET methods. 采用溶胶 凝胶法制备了含Zn、Ni、Co的铁酸盐超微粒子催化剂 ,运用DTA TG、IR、XRD以及BET比表面测试等手段对所制备的样品进行了表征。
- Investigated the film of TiO 2 on granular activated carbon(TiO 2/GAC) prepared from tetrabutyl titanate through the sol gel method. 研究了溶胶 -凝胶法制备以颗粒活性炭为载体的 Ti O2 膜 (Ti O2 /GAC) .
- In this thesis, a simple and effective slurry spin coating approach (as a patent applied by us) was developed for fabricating Sm0.2Ce0.8O1.9 (SDC) films for anode-supported solid oxide fuel cells. 本论文应用我们发明的简单;高效的浆料旋涂制膜方法;制备阳极支撑的固体氧化物燃料电池Sm0.;2Ce0
