您要查找的是不是：
- slide valve cover 滑阀盖
- Clip cable to cable guide at valve cover. 把电缆夹进阀盖上的电缆导槽。
- Install relief valve cover nut and tighten. 安装安全阀阀盖螺母,并加以紧固。
- Products available: diffusion pump, slide valve pump and so on. 工业干泵,扩散泵,旋片泵,机械增压泵,铝插板阀门,滑阀泵,滑阀及机械增压泵。
- Remove the four screws holding the first check valve cover. 拆卸固定第一止回阀阀盖的四个螺丝。
- Remove the four bolts that hold the relief valve cover in place. 拆卸固定安全阀阀盖的四个螺栓。
- Remove the relief valve cover bolts while holding the cover down. 拆卸安全阀阀盖螺栓,握住阀盖并将其取下来。
- Turn both handles of the rotary slide valve( pos. no.15) and the clutch to the emergency position, and the annunciator“ emergency” is lit on. 转动旋转滑阀15和离合器手柄到应急位置，指示器“应急“灯亮。
- Bite valve cover protects from dirt and debris, includes a bite valve inside. 咬合阀盖保护阀远离灰尘和碎片，包括内置咬气门芯。
- Turn both handles of the rotary slide valve (pos. no. 15) and the clutch to the emergency position, and the annunciator "emergency" is lit on. 转动旋转滑阀15和离合器手柄到应急位置，指示器“应急“灯亮。
- Turn both handles of the rotary slide valve (pos. no. 15) and the clutch to the emergency position, and the annunciator “emergency” is lit on. 转动旋转滑阀15和离合器手柄到应急位置，指示器“应急“灯亮。
- Turn both handles of the rotary slide valve( pos. no.15) and the clutch to the position“ normal”, and the annunciator“ pneumatic control” is lit on. 转旋转滑阀手柄15和离合器手柄到正常位置，信号器“气动控制“灯亮。
- Lug Style valves cover the bolting the entire length of the body. 凸耳类型阀门配置贯穿整个阀体长度的螺栓连接。
- The procedure to prevent hardfaccd slide valve rod from crazing and distortion is put forware and rcsuits show that hardfaccd rod possesses good abrasiveness and long life. 现场使用表明:经喷焊强化后的滑阀杆具有较好的耐磨性,延长了使用寿命。
- Using an appropriate sized wrench, loosen the check valve cover. Unscrew the check valve cover and lift it off. 采用尺寸大小适中的扳手松开止回阀阀盖。宁松止回阀阀盖并将其取出来。
- Heavy duty relief valve cover prevents vandalism and protects the valve from damage when the 994HMB is transported to another fire hydrant location. 重型安全阀阀盖，预防故意破坏行为，当994HMB运输到另一个消防栓位置时保护阀门不受破坏。
- Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring. 拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
- Engine valve cover mounted with BMC is reduced by 0.7 dB comparing with that mounted with cast aluminum. 配装压铸BMC复合材料和铸铝材料气门室罩的2115型柴油机整机噪声试验也表明:用压铸BMC气门室罩能降低整机A计权声压级噪声0.;7 dB。
- Manufacturer and sales of Silicone Valve Cover Gaskets for the aviation, automotive and motorcycle community. 为航空、汽车与摩托车行业制造与销售硅树脂阀套垫圈。
- The valve cover shall be held in place through the use of a single grooved style two-bolt coupling. 阀盖应该通过单个沟槽状双螺栓联结器固定住。
