您要查找的是不是：
- Precasting of 40-m PPC Simply Supported Box Girder of Railway Bridge 40 m部分预应力混凝土铁路箱形简支梁预制
- Mechanics Domino Effect Analysis of Pretensioning and Posttensioning Prestressed Concrete Simply Supported Box Girders in High-speed Railway 高速铁路先张预应力混凝土简支箱梁力学效应分析
- INFLUENCE OF THE SPACING OF DIAPHRAGM PLATES ON THE DISTORTION OF SIMPLY SUPPORTED BOX GIRDER UNDER CONCENTRATED LOAD 横隔板间距对集中偏心荷载作用下简支钢箱梁畸变的影响
- Free vibration characteristics of simply supported box girder with effect of shear lag 考虑剪力滞效应的简支箱梁自振特性
- INFLUENCE OF THE SPACING OF DIAPHRAGM PLATES ON THE DISTORTION OF SIMPLY SUPPORTED BOX GIRDER UNDER UNIFORMLY DISTRIBUTED LOAD 横隔板设置对两端固支箱形梁畸变的影响
- simply supported box girder 简支箱形梁
- Landscape Design of Prestressed Concrete Simple Supported Box Girders with Variable Cross-Sections 变截面预应力混凝土简支箱梁的景观设计
- Optimization of the Structural Parameter for Prestressed Simple Support Box Girder of Beijing-Shanghai High-speed Railway 京沪高速铁路预应力简支箱梁结构参数优选
- simply- supported box girders 简支箱梁
- Sum up experiences in the production of box girder. 就制作箱形梁总结制作中经验及体会。
- According to the mechanical character of simply supported steel box girder with prestressed tendons,and considering the interaction of tendons and girder, the finite element model is established. 根据预应力简支钢箱梁的受力特性,考虑预应力索与钢箱梁的相互作用,建立了有限元计算模型,有限元计算值与实测值吻合较好。
- simple - supported box girder 简支箱梁
- The main studying object is the transverse dolly of the box girder. 本论文主要研究的内容为：针对两侧箱梁横移车运动需要同步的要求，对箱梁横移车的推进液压系统及运动同步控制系统进行分析和设计。
- simply supported steel box girder 简支钢箱梁
- The deck is an orthotropic steel box girder of aerofoil shape with cantilevered cycle tracks and footway supported from the box. 桥面板采用翼型正交异性钢箱梁结构，由钢箱支撑起悬臂式自行车专用道和人行道。
- The scheme is a transition between the box girder with vertical piers and the true arch. 该结构是具有垂直墩的箱梁桥钢与真正的拱桥之间的一种过渡形式。
- The successful alternative was the cast-in-place segmental prestressed concrete box girder. 最后采用的方案是分段现浇的预应力混凝土箱形梁。
- Simply supported box beam bridge 简支箱梁桥
- The box girders were to be precast units, bonded together in place at the joints with an epoxy resin. 箱梁采用预制构件，在现场连接处涂以环氧树脂，以粘结成为整体。
- During fabrication slots for the stringers flanges were flame cut into box girders. 制造时，为安装纵梁翼缘，在箱型梁中用焰割法开槽口。
