您要查找的是不是:
- silica gel sheeting 硅凝胶膜
- The crude oil is chromatographed over silica gel. 粗制油状物用硅胶进行色谱分离。
- The purity of isoquercitrin was isolated with a silica gel column. 酶反应产物用硅胶柱层析法提取,可以得到高纯度的异槲皮甙。
- The handpiece cable is made from silica gel tube,soft and durable. 换能器尾线采用进口材料硅胶管,柔软耐用。
- All seals of this machine use the thermostable silica gel (food grade). 该机所有密封件均采用耐高温硅胶件(食品级)。
- There is no possibility to form silica gel in the hard-ened waterglass. 硬化的水玻璃实际上是失水的高模数水玻璃,不可能有硅凝胶生成。
- The specimen was extracted by the macroreticular resin and silica gel column. 样品经大孔树脂柱、硅胶柱分离,然后用TLC进行鉴定合并。
- You may reactivate the silica gel by desorbing the water through heating. 硅胶吸附水份后可通过脱附方式除掉水份而再生。
- Histologic study of silicone gel sheet on fibroblasts and extracellular matrix during the scar hyperplasia. 硅凝胶膜对瘢痕增生影响的组织学研究。
- The alternative use of buffered silica gel resulted in modest hydrolysis (~5-10%) of the imine. 选用温和的水解导致缓冲硅胶(~5-10%25)的亚胺.
- METHODS: Alcoholic extraction, silica gel, ODS column chromatography and recrystallization were used. 方法:采用工业酒精提取、胶柱层析、DS柱层析和重结晶等方法。
- Most of the commercially available reversed phase packing materials utilize fully end-capped, high-purity silica gel. 大部分市面上之逆相充填材料利用完善之终结处理,高纯度之矽胶。
- The pastern mold adopts wearable and heat-resistant silica gel, The aluminium mold can come to 200. 胶模采用耐磨热硅胶;外铝模温度可达200。
- Sand should be added carefully, otherwise the silica gel layer will be destructed. 装石英砂时应慢慢加入,不可一次加入而造成柱层破坏。
- We applied the taitanic plates to orbital and maxillofacial fixation and reconstruction the orbital completeness and after then the silicon gel sheet, taitanic net to repairing orbital injury. 用钛板作眶缘及颌骨内固定,重建眶缘的完整性,然后用矽胶片及钛网作眶壁修补。
- Solid conveyor rollers coated with silica gel to bear heavy objects and minimize damage and wear. 输送滚轴全部选用实心滚轴、外部包硅胶,能承受大重量的物体及耐高温。
- A substance,such as calcium oxide or silica gel,that has a high affinity for water and is used as a drying agent. 干燥剂,脱水剂一种对水有很强吸附性的物质,常用作干燥剂例如:氧化钙,锗化硅等
- Electronics stepless speed regulation,conveyer utilized rotated bar with heatproof tube made of silica gel. 电子无级调速,输送机构采用自转式输送棒,并加耐热硅胶管。
- The optimal shaping condition was set as follows:48.8%EGB,45%MCC,6%PVPP,0.2%silica gel. 处方组成为48.;8%25银杏叶提取物;45%25微晶纤维素;6%25交联聚维酮;0
- Ti-modified silica gel monolithic adsorbent was prepared by impregnation-deposition method. 摘要采用浸渍沉积法制得钛改性硅胶块体吸附剂。