您要查找的是不是：
- Signaling Link Code = the member number within a link set. Signaling Link Code = 链路群内的成员号。
- Signaling Link Code--he member number within a link set. Signaling Link Code -- 链路群内的成员号。
- All signaling links going to the same far end must be assigned the same link set value. 必须为连到同一个远端的信令链路赋予同一个链路群值。
- Link sets can be combined or grouped and typically include all parallel signaling links. 可以对链路群进行合并和分组，通常会包含所有平行的信令链路。
- signaling link set 信令链路组
- The alternate link set must not be equal to the preferred link set. 交替链路群的值一定不能与首选链路群相等。
- A combined link set provides alternate paths between two SS7 nodes. 合并的链路群提供两 SS7 节点之间的交替路径。
- This value must be different from the other two link set values. 该值必须和其他两个链路群的值不同。
- The CHG:SLK command is used to change the minor state of a signaling link. CHG:SLK 命令用于更改信令链路的次级状态。
- Link Set = the link set to which this specific link belongs. Link Set = 该特定链路属于的那个链路群。
- Major State of Link = the major equipage status of the signaling link. Major State of Link = 该信令链路的主要设备状态。
- A link set may consist of up to 16 links. 一个链路群可能由 16 条链路组成。
- When a process terminates it sends an exit signal, either normal or non-normal, to the processes in its link set. 当一个进程终止的时候，它发出一个退出信号（不论是否正常退出）到和它链接在一起的所有进程。
- Signaling links are usually equipped in pairs in SS7 networks. 信令链路常常是成对地装配在 SS7 网络中。
- The device routes or switches incoming messages to an outgoing signaling link using routing information within the multitiered SS7 message. 该装置为利用多层七号信令报文中的路由信息，为进来的报文送到输出的信令链路上建立路由或进行交换。
- Preferred Link Set-the preferred link set is specified in this field. Preferred Link Set -- 在该字段指定首选的链路群。
- This state Indicates that the AP-DS1 is available for use by an RCS signaling link. 该状态表明 AP-DS1 可供 RCS 信令链路使用。
- Link Node Address (Group and Member) = the node within the IMS ring on which the signaling link terminates. 链路节点地址 (Group and Member) = IMS 环路内信令链路终止的节点。
- Signal unit initial alignment - invokes initial alignment prior to activating or restoring a signaling link. 信令单元初始定位 -- 在激活或恢复信令链路之前调用初始定位。
- All 16 links can be assigned the same link set number. 全部16 条链路会分配到同一个链路群号码。
