您要查找的是不是：
- This paper"s main content is the study of short carbon fiber utilized in HPC . 本文研究了低掺量短碳纤维在HPC中的应用。
- Effects on workable and mechanic capacity and microstructure of short carbon fiber to HPC were studied by uniform test. 通过均匀试验,研究了短碳纤维对高性能混凝土工作性、力学性能和微观结构的影响。
- Short carbon fiber reinforced copper-graphite composite materials was studied based on advanced pantagraph slider as its application background. 摘要以高性能受电弓滑板为应用前景，研究了短炭纤维对铜-石墨复合材料冲击性能的影响。
- One of key factors to ensure the compression-sensibility stableness of CFRC is the dispersion of short carbon fiber (CF) in cement paste uniformly. 在CFRC的制备过程中，碳纤维的均匀分散是决定碳纤维水泥石及混凝土压敏稳定性的关键问题之一。
- This paper describes the rnanufacturing technology at home and abroad,themixing of short carbon fiber and copper alloy powder,and the formmg technique of C/Cu compo-site,etc. 概述了国内、外碳/铜复合材料制造工艺;短碳纤维与铜合金粉末的混合;碳/铜复合材料的成型工艺等。
- Short carbon fiber reinforced pitch-based carbon/carbon composites (SCFRC) with high density and low cost were fabricated by mold pressing followed by semi-carbonization. 摘要利用模压半炭化成型工艺在大气环境下制备出了短切炭纤维增强沥青基C/C复合材料（简称SCFRC）。
- The properties of short carbon fiber reinforced composites (SCFRC) are strongly influenced by fiber homogenization techniques (FHTs) in the matrix materials of SCFRC. 短碳纤维在基体材料中的均匀化技术对短碳纤维复合材料的性能有显著的影响。
- Meanwhile, short carbon fiber is a self-lubricant in the composites, so the friction coefficient and wear rate of the composites decrease with increase of carbon fiber content. 复合材料中短碳纤维起到了明显的自润滑作用,复合材料的摩擦系数和磨损率均随碳纤维含量的增加而明显降低;
- Three novel electro-and thermo-sensitive shape memory materials, metal fiber (NF)/ polycaprolactone (PCL), short carbon fiber (SCF)/PCL and carbon black (CB)/PCL conductive composites, have been prepared. 以聚己内酯(PCL)作为聚合物基体,乙炔炭黑(CB)、短切碳纤维(CF)、短切镍纤维(NF)分别作为导电填料,制备具有电致形状记忆特性的PCL/导电填料复合材料。
- LIANG Jin-hua,HUANG Qi-zhong,SU Zhe-an,et al.Manufacture procedure of short carbon fiber reinforced C/C-SiC composite [J].Materials Science and Engineering of Powder Metallurgy,2005,10(1):65-70. [6]梁锦华;黄启忠;苏哲安;等.;短纤维增强C/C-SiC复合材料的制备工艺[J]
- The copper matrix composites reinforced with short carbon fibers (CFs) were prepared by cold press and sintering using copperized short CFs. 摘要采用冷压烧结工艺制备了短碳纤维增强铜基复合材料，考察了该复合材料的干摩擦磨损性能。
- Adding appropriate amount of short carbon fibers and aluminum powder to increase the tensile strength of bimaleimide (BMI) can greatly improve the composite's mechanical properties. 摘要加入适当的碳纤维和铝粉对双马来酰亚胺(BMI)树脂进行复合增韧，可以有效改善其力学性能。
- Study of the Raw Aluminium Matrix Composites Reinforced by Short Carbon Fiber 短碳纤维增强工业原铝复合材料的研究
- Keywords caoutchouc;short glass fiber;short carbon fiber;mechanical property; 天然橡胶;短玻璃纤维;短碳纤维;力学性能;
- Keywords electrodeposition;short carbon fiber;copper matrix composite; 电镀;短碳纤维;铜基复合材料;
- Yixing Xinwei Carbon Fiber Weaving Co., Ltd. 宜兴市新维碳纤维织造有限公司。
- Titanium Composite Carbon Fiber Reinforced Plastic. 中文翻过来就是钛复合碳素纤维增强型塑料。
- Black, Salmon, Ceramic and Carbon Fiber. 黑色，鲑鱼，陶瓷和碳纤维。
- The rear end has a carbon fiber diffuser. 在尾部有一个碳纤维扰流.
- MICROSTRUCTURE AND MECHANICAL PROPERTY OF SHORT CARBON FIBER REINFORCED INJECTION- MOULDED PEEK COMPOSITES 短碳纤维增强注塑聚醚醚酮复合材料微观结构与力学性能研究
