您要查找的是不是：
- series mode rejection ratio 串联抑制比
- Its common mode rejection ratio(CMRR) was 65 dB at 100 kHz. 在100kHz时,该系统仍具有65dB的共模抑制比。
- Common Mode Rejection Ratio: The ratio of the input voltage range to the peak-to-peak change in input offset voltage over this range. 共模抑制比,输入电压范围除以该范围内输入失调电压峰峰值。
- Based on the structure,an ultra-low voltage operational amplifier is designed,which provides a rail-to-rail common-mode input voltage range and output voltage swing,as well as a high common mode rejection ratio(CMRR). 基于此结构,实现了一种超低压运算放大器。 仿真分析表明,该运算放大器能够实现轨到轨(rail-to-rail)的共模输入电压范围和输出电压摆幅,以及较高的共模抑制比。
- Simulation shows that the power supply rejection ratio(PSRR) of the circuit has been greatly improved,and high common mode rejection ration(CMRR) has been achieved for the cascode OTA. 该设计提高了电源抑制比(PSRR),并具有较高的共模抑制比(CMRR)。
- Normal mode rejection ratio (NMRR) defines how well the instrument rejects or attenuates noise that appears between the HI and LO input terminals. 串模抑制比（NMRR）说明了仪器抑制或衰减高、低输入端之间出现的噪声的能力。
- common mode rejection ratio(CMRR) 共模抑制比
- CMRR common mode rejection ratio 共模抑制比
- normal mode rejection ratio (NMRR) 串模干扰抑制比
- common mode rejection ratio (CMRR) 共态抑制比
- input connon mode rejection ratio 输入共模信号抑制比
- Keywords Electroencephalogram（EEG）;preamplifier;linear opto-couplers;Common Mode Rejection Ratio（CMRR）;anti-interference; 前置放大器;线性光耦;共模抑制比;抗干扰;
- normal mode rejection ratio 归一模式抑制比
- common mode rejection ratio 共模抑制比,同相抑制比
- 9. Simulation shows that the power supply rejection ratio(PSRR) of the circuit has been greatly improved,and high common mode rejection ration(CMRR) has been achieved for the cascode OTA. 本文讨论了二元调宽脉冲再平衡回路前置放大器应用中的稳定性,上升速率,共模抑制比等问题,特别对前置放大器与电容电桥的匹配联接问题进行了具体的试验和分析。收藏指正
- In this situation, the CMRR (common-mode rejection ratio) of the input differential amplifier was unsatisfactory. 在这种情况下，输入差分放大器的CMRR（共模抑制比）不令人满意。
- Improve constantly technique to increase the productive efficiency, shorten the production cycle and reduce the reject ratio. 不断改进工艺以提高生产效率,降低生产周期和降低报废率。
- A novel current reference source based on subthreshold MOSFET's with high power supply rejection ratio(PSRR) is presented. 基于亚阈值MOSFET,提出了一种新颖的高电源抑制比(PSRR)电流基准源。
- To keep its lumpiness and reduce the number of broken product seems a key step for the decrease of rejection ratio and raw material consumption. 保持型焦的块状度,减少破碎是降低铸件废品率,减少原料消耗的关键。
- Normal Mode Rejection Ratio. The ability of an instrument to reject an AC interference (usually of line frequency) across its input terminals. Usually expressed in decibels at a frequency. 常模抑制比仪器抑制其输入端子上交流干扰的能力（通常是线路频率）。通常表示为某个频率下的分贝值。
