您要查找的是不是：
- serial data mode 串行数据方式
- When serial communication mode is adopted for time correction,interruptions are applied for receiving /sending serial data of date / time information. 采用串行通信方式授时,串行数据的收/发均采用中断方式,能提供日期和时间信息;
- The serial interface operates in an internal clocking (master) mode, whereby an internal serial data clock and framing pulse are device outputs. 串行接口在内部时钟（主）模式下工作，由此器件输出内部串行数据时钟和成帧脉冲。
- The procedure of converting serial data into parallel data. 将串行数据转换为并行数据的过程或方法。
- Parallel data is shifted to serial data output in the transmit mode, and serial data input is shifted to parallel data in the receive mode. 在传送模式下，并行数据被移到串行数据输出，而在接收模式下，串行数据输入被移到并行数据。
- USB employs NRZI data encoding to transmit USB serial data. USB串行数据采用了NRZI编码,在USB数据线上传输。
- The GCM communicates with the PCCI control over a serial data link. GCM与PCC通过串行数据连接。
- The serial data stream from the DOUT pin has a channel identifier bit and a mode identifier bit, which provide information about the channel converted and the current mode of operation. DOUT引脚的串行数据流有一个通道识别位和一个模式识别位,可提供所转换通道和当前工作模式的相关信息。
- The article described the operation on the Multidimensional Data Mode through simply way. 以一种更简明的方式展现了针对立方体的基本操作。
- A serial data output permits cascading of multiple devices in applications requiring additional drive lines. 串行数据输出允许在需要附加驱动线路的应用中进行多器件级联。
- CMOS serial data outputs permit cascading for applications requiring additional drive lines. CMOS串行数据输出允许在需要附加驱动线路的应用中使用级联。
- A GPRS device, which resembles a modem with an extended AT command set, must define a context using an AT command before it enters data mode. GPRS设备类似于拥有扩展AT命令集的调制解调器,在进入数据模式之前必须使用AT命令定义一个上下文。
- After the connection is established to the remote modem, the modem automatically goes into data mode, and the user can send and receive data. 连接成功之后Modem自动进入数据模式,可以收发数据了。
- A CMOS serial data output permits cascade connections in applications requiring additional drive lines. CMOS串行数据输出允许需要附加驱动线路的应用的级联连接。
- A CMOS serial data output permits cascading between multiple devices in applications requiring additional drive lines. CMOS串行数据输出允许需要附加驱动线路的应用中多器件间的级联。
- The 2-wire interface is a widely used Master, multi-slave protocol using a serial clock (SCL) and a serial data line (SDA). 此2线接口是一个广泛使用的主机、使用串行时钟（SCL）和串行数据线（SDA）的多从机协议。
- DIU receives and sends serial data. C/DSU changes the format of serial data and matches the physical data link. DIU完成据串行接口的功能,C/DSU完成数据帧传输的格式转换和链路匹配的功能,同时实现了端口的复用和扩展。
- This paper intraduces a software method for detecting the hardware protocol(baud rate,data bits,ets)of serial data transfer. 介绍了一种用软件侦测串口底层协议 (波特率、数据位等 )的方法。
- Baud Rate The speed of data transmission in serial data communications approximately equal to the number of code elements (bits) per second (BPS). 波特率串行数据传输速率，约等于每秒钟传输的比特数。
- R232 serial protocol understanding, know how to read serial data, send data to the serial port. 串口R232协议的了解;懂得如何读取串口的数据;发送数据到串口.
