您要查找的是不是：
- Keywords PKM gasifier;auto feed coal;coal lock hopper DCS system;sequence control program; 加压气化炉;自动加煤;DCS系统;顺序控制;
- sequence control program 顺序控制程序
- According to the work characteristic of the manipulator,stepping sequence control is adopted so as to simplify program. 根据该机械手的工作特点,采用步进顺序控制方式,使程序简化,便于调试。
- VCPI? Virtual Control Program Interface? 虚拟控制程序接口（规范）?
- VMCP? Virtual Machine Control Program? 虚拟机控制程序?
- The PLC technique is primarily used in sequence control . plc技术原主要用于顺序控制方面。
- VCP? Virtual Circuit control Program? 虚拟电路控制程序?
- A directive(by means of a basic transmission unit) from an access method that causes the network control program to perform a data-transfer operation or auxiliary operation. 在某种存取方法中，利用基本传输部件发出的一种指令，它使得网络控制程序执行数据转移或辅助操作。
- A control program routine that accomplishes 1, 2, 3, or 4. 完成上述1,2,3或4动作的控制例行程序。
- The heat treater has no process control program of any type. 热处理方没有任何过程控制的方法。
- A control program routine that accomplishes1,2,3, or4. 完成上述1，2，3或4动作的控制例行程序。
- Depend on the control requirement of the machine, the author write the sequence control PLC program and self-diagnose alarm program, accomplish the action control of the fixture and periphery auxiliary system . 根据设备的PLC控制要求编写了顺序动作控制PLC程序和报警自诊断程序，完成了夹具和外围辅助系统的动作控制，同时使得系统有故障时能自动诊断并通过GOT显示面板发出报警提示。
- That part of a control program that is resident in main storage. 控制程序中常驻在主存中的那部分。同residentcontrol program。
- The catalyst auto-continuous addition was realized by using the CENTUM sequence control function. 利用CENTUM集散控制系统的顺序控制功能，即可实现催化剂自动连续补加。
- With phase sequence control to prevent motor reversal due to the adverse consequences. 配有相序控制器;可防止因电机反转所造成的不良后果.
- The if-else statement is probably the most basic way to control program flow. if-else语句或许是控制程序流程最基本的形式。
- Abstract: Some design rules for sequence control system in DCS are discussed.It is useful for the design of sequence control and start-stop control. 文摘:讨论了在DCS中实施顺序控制系统时程开停车控制有一定的实用意义。
- The software module is composed of the driver and the control program. 软件模块包括驱动程序和控制程序。
- The heat treater has a process control program, but does not comply with W-HTX. 热处理方有过程控制方案,但不符合。
- The instruction of Sequence Control Relay (SCR) is used as the primary design method to achieve feeding, locating testing and fixing gas lock valve intermitently and in sequence. 以顺序控制继电器指令（SCR指令）作为实现控制的主要设计方法，实现了闭气塞的输送、定位、检测、抓取等环节按一定时序有节拍的控制。
