您要查找的是不是：
- secondary axial force 次轴力
- It can work steadier to adopt hydraulic balanced axial force. 采用水力平衡轴向力，减少平衡鼓，可使运行更为平稳。
- The planimetric position of the piles which endure the extremum axial force is different. 受开挖区域的影响，承受轴力最大值、最小值桩体的平面位置是变化的。
- This method is applied to analyze the lateral force of bit linearly with the nonlinear axial force being considerated. 考虑轴向力的非线性影响，应用该方法对底部钻具组合的钻头侧向力进行了线性分析。
- The effects caused by a axial force and the waveness in the surfaces of innerring are analysed. 本文主要对砂轮不平衡量引起的磨削表面波纹度进行了理论分析。
- Overloading of axial force acted on working roll is the primary reason to cause the bearing damage. 工作辊轴向力过载是导致轴承烧损的主要原因。
- This paper analyzes the effect of negative friction on pile s axial force and its calculation. 分析研究负摩擦力对桩轴力的影响及基桩负摩擦力的计算。
- Hydrostatic bearing can solve the equilibrium problem of axial force of multistage centrifugal pump satisfactorily. 液体静压支承技术可以很好地解决多级离心泵轴向力的平衡问题。
- This paper defines neutral section and neutral point respectively with effective axial force and ac. 本文还用有效轴力和真实轴力分别定义了中性截面和中和点。
- The incremental axial force of pile rises to 14kg when the surcharge increases to 1kg/cm2. 而摩擦桩试验中，由于桩体产生较大沉陷量，而拉高中立点位置，使负摩擦力影响范围减少。
- The mechanics models of metal-bands transmission concerning clamp force of pulley, axial force, thrust and tension is built based on Coulomb friction theory. 以库仑摩擦理论为基础，在考虑了带轮夹紧力、轴向力、挤推力和金属环张力的基础上，建立了金属带传动的力学模型。
- And axial force is applied to adobe masonry specimen, which are laid by varies marshaling way, to study their axial compression performance and failure forms. 使用不同的砌筑方法砌筑土坯砌体试件，对试件施加轴心压力，研究砌体轴心受压性能、破坏形态；
- Under axial force, moment and shear force steel-concrete joint subjected to compressive stress, tensile stress and shear stress. 在轴力、弯矩和剪力的作用下，钢-混凝土接头处将产生轴向压应力、拉应力和剪应力。
- Axial force is balanced by back vane or balanceable hole, for the specification with big radial force; we adopt double-wear passage design. 轴向力由副叶片或平衡孔平衡，对于径向力在的规格采取了双壳体设计；
- Axial forces in the three working rollers reaches maximum at startup. 三个工作轮的轴向力随着变矩器的工况变化，在起动工况时达到最大值。
- Transmitted torque,thrusts of driving and driven pulleys,and axial force between two pulleys were measured on a metal pushing V-belt type CVT. 本文在金属V-带推块型CVT上，测出了主、从动带轮的传递转矩和推力以及两带轮间的轴向力。
- The bending moment,axial force of the pile and subfloor are also analyzed.Then it draws some conclusions useful to practical engineering. 对开挖引起的地面、建筑物角点的沉降规律做了分析与探讨,同时也分析了桩和底板的弯矩、轴力、剪力等变化规律,得出了有意义的结论。
- A computing method is presented for studying the bending moment, axial force and curvity relationship at the section of prestressed concrete beam. 提出预应力砼截面弯矩-轴力-曲率关系的计算方法，并计算了不同预应力度下截面的弯矩-曲率关系。
- Analytic solution is established to describe axial force distribution of strings helical buckled in vertical wells when slack down from the top. 用解析法建立管柱下放时的轴向力表达式,得出轴向力极限值。
- The full-scale model tests of unstiffened steel tubular X-joint under axial force,bending and torsion conditions are presented in the paper. 介绍了双向贯通式节点在轴拉(压)、弯扭作用下的足尺节点试验研究。
