您要查找的是不是：
- Immediate quenching and tempering process of steel T10 after low temperature salt bath chromizing was studied. 研究了 T10钢在低温盐浴渗铬后直接淬火并回火工艺。
- The microstructure ,phase make up,chromium thickness,microhardness and corroding resistance of low temperature salt bath chromizing layers of steel Q235,45 and T10 are contrasted. 通过Q235钢、45钢、T10钢低温盐浴渗铬层的金相组织、相结构、厚度、铬浓度、显微硬度和耐蚀性的对比,表明碳含量越高,铬碳化合物层越厚,显微硬度越高,耐蚀性越好。
- This paper deals with the salt bath chromizing techniques and the effect of RE as a catalytic agent in salt bath on T12A steel chromizing technique, layer microalloying, structure and properties. 研究了熔盐被覆铬碳化物的工艺过程，着重探讨了稀土对T12A钢熔盐渗铬的催渗及微合金化作用机理。
- The results showed that a chromized layer with good wear resistance could be gained in steel 45 by low temperature salt bath chromizing. 研究了45钢低温盐浴渗铬工艺,分析了渗铬层的金相组织和相结构,测量了渗层厚度、渗层硬度及铬浓度分布,并进行了渗铬层的耐磨试验。
- It was investigated that chromizing in borax salt bath and melting hydrochloride. 研究了硼砂盐浴渗铬和氯系熔盐渗铬。
- Salt Bath Started by Salt Slag Re. 盐渣电阻启动电极盐浴炉。
- Salt Bath Started by Salt Slag Resistor. 盐渣电阻启动电极盐浴炉盐渣电阻启动电极盐浴炉。
- The structure of electrode neutral salt bath titanized layer of T12 steel has been studied by means of microscope, EPMA,X-ray diffractometer and TEM. 用光学显徽镜、电子探针、X射线衍射仪和透时电镜研究了T12钢电极中性盐浴渗钛层的组织结构。
- The result shows that the porosity of nitrided layer is due to the over concentration of CNO- in the salt bath. 试验结果表明，渗层疏松主要是由于盐浴内CNO－浓度过高所致；
- Protecting effect of SQA coating was compared with that of commercial paints or salt bath treatment. 用SQA型涂料和商品涂料进行加热保护及用盐浴处理,对保护效果进行了比较,结果表明SQA型是一种较为理想的高、中温防氧化脱碳涂料。
- The carbon steel used in the mixed salt bath which is the mixture of broax and neutral salt for vanadinizing. 采用硼砂与中性盐混合盐浴对碳钢试样进行渗钒,研究钢含碳量及保温时间对覆层厚度的影响。
- If one takes a salt bath and requires salt, salt will be absorbed through the pores into the crystalline form. 如果你做了一次盐浴且身体正需要盐，那么盐就将透过毛孔而被吸入到水晶形体中。
- The austempering in salt bath can increase the impact toughness and wear resistance of the high alloy white cast iron. 盐浴等温淬火可提高高合金白口铸铁的冲击韧性及耐磨损性能。
- Effect of the Ti catalysis on the nitrocarburizing of Cr12 steel in salt bath at a low temperature was investigated. 阐述了钛催渗低温盐浴氮碳共渗机理,重点研究了钛催渗对几种不同材料钢氮碳共渗的影响。
- The salt bath nitrocarburizing techonlogy of WD615 diesel engine crankshaft was studied. 研究了WD615柴油机曲轴盐浴氮碳共渗工艺。
- This paper deals with the non-toxic nitrocarburizing of the valve in salt bath at lowtemperature. 通过气门低温无毒盐浴氮碳共渗试验，提出了一种新的金属化学热处理工艺。
- Deactivation and reactivation of salt baths are studied. 摘要研究了盐浴的失活与复活。
- The basic principle and specific process of eutectic melting boriding in salt bath are investigated initially in this paper. 对盐溶共晶化渗硼的基本原理和具体工艺进行了探讨。
- This paper mainly describes the feasibility experiment, design and main functionof the two-hundred kilowatt power salt bath furnace. 本文主要描述了对200千瓦盐浴铝钎焊盐浴炉的方案试验、设计及主要使用性能。
- Also, epsom salts baths have helped. 另，消化酵素对正常的分解吸收有帮助。
