您要查找的是不是：
- rim lock cylinder 弹簧锁芯
- For example: Profile mortise lock or double bolt rim lock, the cylinder can operate the square bolt, while the lever can operate the spring latch only. 如：弹子插芯门锁或外装双舌门锁，锁头为开、关方舌，执手为开、关斜舌，但有联动机构的，既可开、关方舌，同时又开、关斜舌，而执手仍保持单独开、关执手；
- Remove the lock cylinder retainer clip. 拆下锁芯固定夹子。
- LEFT DOOR LOCK CYLINDER SWITCH PERFORM "VTSS" TEST 11A. 左门锁插孔开关执行“VTSS＂测试11A。
- Apply a small amount to the key and insert it into the lock cylinder. 给车门钥匙敷点润滑油，然后将之插进锁芯。
- Insert the key in the ignition lock cylinder and turn the ignition switch to the On position. 将钥匙插入点火锁柱中，旋转点火开关到开启的位置。
- Rotate the SKIM and its mounting bracket downwards and then to the side away from the steering column to slide the SKIM antenna ring from around the ignition switch lock cylinder housing. 向下旋动skim及其安装托架，然后向转向柱侧面旋转，将skim天线环滑动到点火开关锁柱插槽附近。
- Remove the lock cylinder. 拆下锁芯。
- Push the glove box lock cylinder firmly into the lock cylinder bore while rotating the key and cylinder counterclockwise to the 6 o'clock position, where the lock cylinder retaining tumbler will snap back into place. 将手套箱锁柱压入锁柱孔，同时逆时针旋转钥匙和锁柱至六点钟位置，这样锁柱定位卡簧将弹回原处。
- Push the glove box lock cylinder firmly into the lock cylinder bore while rotating the key and cylinder counterclockwise to the6 o' position, where the lock cylinder retaining tumbler will snap back into place. 将手套箱锁柱压入锁柱孔，同时逆时针旋转钥匙和锁柱至六点钟位置，这样锁柱定位卡簧将弹回原处。
- Liftgate Lock Cylinder Switch Remove/Install 升降闸门锁芯开关拆卸/安装
- The milk slopped over the rim of the glass. 牛奶溢到玻璃杯外面来了。
- Design of fine lock cylinder control circuits 锁紧气缸控制回路设计
- The valley ended in a perpendicular rim of granite. 那山谷的尽头是花岗石的断崖。
- A rim, as of a vessel, bell, or crater. 边容器、铃和坑的边缘
- He fitted the tire around the rim of the wheel. 他把轮胎安到轮辋上。
- She put a flower on the rim of the hat. 她在帽子边上放了一朵花。
- He chiseled a hole in the door to fit a new lock. 他在门上凿了个孔，以便装一把新锁。
- This lock can only be opened from the inside. 这把锁只能从里面打开。
- He put the key in the lock and turned it. 他把钥匙插入锁里转动。
